manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

63

SEQ

1.1

1.2

2.1

2.2

3.1

3.2

3.3

3.4

4.1

4.2

4.3

4.4

5.1

5.2

6.1

7.1

7.2

Portamento

[PRG, Off, 001...127]

Specifies the portamento effect for each track 1–16 
(

☞

COMBI 3.1–2a).

The portamento setting you make here will be used 
when the song is played or recorded from the begin-
ning. If you change the setting while recording, it will 
be recorded as part of the musical data. (However if 
you set this to PRG, it will not be recorded.) You can 
change this setting during playback. However if you 
come to any Portamento On/Off data or Portamento 
Time data that was recorded, the settings will change to 
the recorded values.
When the track whose “Status” (3.1–1a) is INT or BTH, 
MIDI control change (CC) #05 (Portamento Time) and 
CC#65 (Portamento Switch) can be received to control 
this and change the setting. (If the setting is PRG, 
CC#05 Portamento Time will not be received.)
When you switch songs or return to the beginning of 
the song, tracks whose “Status” is BTH, EXT, or EX2 
will transmit this setting via MIDI. If this is Off, CC#65 
with a value of 0 will be transmitted. If this is 001–127, a 
CC#65 of 127 and CC#05 of 1–127 will be transmitted.
If this is set to PRG, nothing will be transmitted.
This data is transmitted on the MIDI channel specified 
for each track by “MIDI Channel” (3.1–1a).

3.1–3(4)b: UTILITY

☞

“Memory Status,” “Solo Selected Track,” “Rename Song,” 
“Delete Song,” “Copy From Song,” “Copy From Combi,” 
“Load Template Song,” “Save Template Song,” “FF/REW 
Speed,” “Set Location” (1.1–1d)

3.1–5: Ptch..8 

(Pitch T01...08)

3.1–6: Ptch..16 

(Pitch T09...16)

Here you can make pitch-related settings for each track.

3.1–5(6)a: Transpose, Detune, Bend Range

Transpose

[–24...+24]

Adjusts the pitch of each track in semitone steps.
12

 steps are one octave.

Detune (BPM Adj.)

[–1200... +1200]

Adjusts the pitch of each track in one-cent steps from the 
normal pitch.

0:

 Normal pitch.

You can use the “Detune BPM Adjust” (3.1–5(6)b) page 
menu command to make a calculation in BPM units 
and set Detune automatically.

“Transpose” and “Detune” settings do not affect the 
note data that is transmitted via MIDI. “Transpose” and 
“Detune” are controlled by received MIDI RPN mes-
sages. The “Oscillator Mode” (PROG 2.1–1a) of the pro-
grams selected for tracks 1–16 will be controlled as 
follows.

• If “Oscillator Mode” is Single or Double, MIDI RPN 

Coarse Tune messages can be received to control and 
change the “Transpose” setting, and Fine Tune 
messages to control and change the “Detune” setting.

• If “Oscillator Mode” is Drums, MIDI RPN Coarse Tune 

and Fine Tune messages can be received to control and 
change the “Detune” setting. The range of control will 
be ±1 octave when Coarse Tune and Fine Tune are 
added.

Bend Range

[PRG, –24...+24]

Specifies the range of pitch change that will occur when the 
pitch bender is operated.

PRG:

 The pitch range specified by the program will be used.

–24–+24:

 Regardless of the setting of the program, pitch 

bending will use the range you specify here.

This setting can be controlled and changed by received 
MIDI RPN Pitch Bend Range messages. (These mes-
sages will not be received if the setting is PRG.)

3.1–5(6)b: UTILITY

☞

“Memory Status,” “Solo Selected Track,” “Rename Song,” 
“Delete Song,” “Copy From Song,” “Copy From Combi,” 
“Load Template Song,” “Save Template Song,” “FF/REW 
Speed,” “Set Location” (1.1–1d)

For details on how to select the desired utility function, refer 
to “PROG 1.1–1c: UTILITY.”

Detune BPM Adjust

If the program of a track uses a phrase or rhythm loop multi-
sample or sample created by adjusting the BPM in Sampling 
mode (if the separately sold EXB-SMPL option is installed) 
or loaded in Media mode, this command adjusts the BPM. 
“Detune BPM Adjust” adjusts the BPM of the phrase or 
rhythm by changing the pitch.
This command is available for a track when the “Detune” 
setting of that track is selected. When you execute this com-
mand, the selected “Detune” value will be adjusted.
For the procedure, refer to “Detune BPM Adjust” (COMBI 
3.1–3b).

3.1–5a

1.1–1c

3.1–5b

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

LaMotte 2020 Cheat Sheet preview
2020
Бренд: LaMotte Страницы: 2
janitza FBM Series Manual preview
FBM Series
Бренд: janitza Страницы: 28
Yamaha VA-10 Owner'S Manual preview
VA-10
Бренд: Yamaha Страницы: 4
A&D SV-1A Instruction Manual preview
SV-1A
Бренд: A&D Страницы: 102
ICS Schneider Messtechnik Snap 41 Instruction Manual And Safety Information preview
Snap 41
Бренд: ICS Schneider Messtechnik Страницы: 40
Pasco Scientific Precision 2.0 Instruction Manual And Experiment Manual preview
Precision 2.0
Бренд: Pasco Scientific Страницы: 11
Motortech EasyNOx Operating Manual preview
EasyNOx
Бренд: Motortech Страницы: 142
KROHNE OPTIFLUX 4040 C Series Supplementary Instructions Manual preview
OPTIFLUX 4040 C Series
Бренд: KROHNE Страницы: 20
Pyle Pro PPG860A Owner'S Manual preview
PPG860A
Бренд: Pyle Pro Страницы: 2
Cal Test Electronics CT3688A User Manual preview
CT3688A
Бренд: Cal Test Electronics Страницы: 12
ACCRETECH UF200R User Manual preview
UF200R
Бренд: ACCRETECH Страницы: 104
Geotech In-Situ Rugged TROLL 100 Operator'S Manual preview
In-Situ Rugged TROLL 100
Бренд: Geotech Страницы: 6
iSTEK K100-TB Instruction Manual preview
K100-TB
Бренд: iSTEK Страницы: 15
Alma Automotive OBI-M2 User Manual preview
OBI-M2
Бренд: Alma Automotive Страницы: 171
E+E Elektronik EE776 Series Manual preview
EE776 Series
Бренд: E+E Elektronik Страницы: 36
Kawai CA-X Owner'S Manual preview
CA-X
Бренд: Kawai Страницы: 52
Zenner Minolist ER2 Installation Manual preview
Minolist ER2
Бренд: Zenner Страницы: 12
PASCO PS-3217 Instruction Manual preview
PS-3217
Бренд: PASCO Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды