manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

PROG

 1.1

 2.1

2.2

3.1

4.1

4.2

5.1

5.2

5.3

6.1

7.1

7.2

PROG

 1.1

 2.1

2.2

3.1

4.1

4.2

5.1

5.2

5.3

6.1

7.1

7.2

11

range of pitch change produced by the pitch EG in a range 
of ±1 octave (

☞

p.214). As you play more softly, the pitch 

change will draw closer to the pitch EG levels.

“Intensity” and “AMS (Pitch EG AMS)” will be 
summed to determine the depth and direction of the 
pitch modulation applied by the pitch EG.

3.1–1c: Portamento

This turns the portamento effect (smooth change in pitch 
from one note to the next) on/off, and specifies how it will 
be applied. If [SW 1] or [SW2] are set to Porta.SW(CC#65), 
turning SW1 or SW2 on/off will apply portamento (

☞

p.212 

“AMS List,” p.220 “SW1, SW2 Assign List,” Prta.SWCC#65).

Portamento will also be switched when CC#65 (Porta-
mento SW) is received.

Enable (Porta. Enable)

[Off, On]

On (checked):

  Portamento will be applied.

Off (unchecked):

 Portamento will not be applied.

Fingered (Porta. Fingered)

[Off, On]

This parameter is available when “Enable (Porta. Enable)” is 
checked.

On (checked):

  Portamento will be applied when you con-

tinue holding the previous note as you press the next note 
(legato playing).
Off (unchecked):

 Portamento will always be applied, 

regardless of how you play.

Time (Porta. Time)

[000...127]

This parameter is available when “Enable (Porta. Enable)” is 
checked.
This sets the portamento time. Increasing the value will pro-
duce a slower change in pitch.

■

 3.1–1d: UTILITY

☞

“Write Program” (1.1–1c), “Copy Oscillator,” “Swap 
Oscillator” (2.1–1d)

3.1–2: OS1lfo 

(OSC1 LFO)

Specifies the amount of pitch change produced by LFO1 and 
LFO2 for oscillator 1.

3.1–2a: Pitch LFO1/2 Modulation

LFO1:

Intensity (LFO1 Intensity)

[–12.00…+12.00]

Specifies the depth and direction of the pitch modulation 
applied by the OSC 1 LFO1 settings you made in 
“OS1LFO1” page (5.3–1).
With a setting of 12.00, a maximum of ±1 octave of pitch 
modulation will be applied. Negative (–) values will invert 
the LFO waveform.

JS+Y Int. (LFO1 JS+Y Int.)

[–12.00…+12.00]

Specifies the depth and direction of the effect that joystick 
movement in the +Y direction (away from yourself) will 
have on the pitch modulation applied by the OSC1 LFO1.
As this value is increased, moving the joystick in the +Y 
direction will cause the OSC1 LFO1 to produce deeper pitch 
modulation. With a setting of 12.00 a maximum of ±1 octave 
of pitch modulation will be applied. Negative (–) values 
will invert the LFO waveform.

AMS (LFO1 AMS)

[Off, (PEG, FEG, AEG, KT, EXT)]

Indicates the source that will control the depth of pitch mod-
ulation produced by the OSC1 LFO1 (

☞

p.212 “AMS List”).

Intensity (AMS Intensity)

[–12.00…+12.00]

Specifies the depth and direction of the effect that “AMS 
(LFO1 AMS)” will have.
With a setting of 0, modulation will not be applied. With a 
setting of 12.00, the OSC1 LFO1 will apply a maximum of ±1 
octave of pitch modulation. Negative (–) settings will invert 
the LFO waveform.
For example if “AMS” is set to AfterT and you apply pres-
sure to the keyboard, a positive (+) setting of this parameter 
will cause the pitch modulation created by OSC1 LFO1 to be 
applied with the normal phase, and a negative (–) setting 
will cause the LFO to be applied with inverted phase.
The “Intensity (LFO1 Intensity),” “JS+Y Int. (LFO1 JS+Y 
Int.)” and “AMS (LFO1 AMS)” settings will be added to 
determine the depth and direction of the pitch modulation 
applied by OSC1 LFO1 (

☞

p.214).

LFO2:

Intensity (LFO2 Intensity)

[–12.00…+12.00]

JS+Y Int. (LFO2 JS+Y Int.)

[–12.00…+12.00]

AMS (LFO2 AMS)

[Off, (PEG, FEG, AEG, KT, EXT)]

Intensity (AMS Intensity)

[–12.00…+12.00]

Refer to the preceding section “LFO1.”

■

 3.1–2b: UTILITY

☞

“Write Program” (1.1–1c), “Copy Oscillator,” “Swap 
Oscillator” (2.1–1d)

3.1–3: OSC2

Specifies how the key position (on the keyboard) will affect-
the pitch of oscillator 2, and selects the controller that will 
affect the pitch and specify the depth of control. Here you 
can also specify the amount of pitch change produced by the 
pitch EG, and set the portamento mode and on/off status. 
For details on each parameter, refer to the preceding “3.1–1: 
OSC1.”

Pitch change (level)

Softly played
(Intensity (Pitch EG) setting)

Strongly played with a
negative (–) value

Strongly played with
a positive (+) value

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

3.1–2a

3.1–2b

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

PAT DS 150 Service Manual preview
DS 150
Бренд: PAT Страницы: 55
PAT DS 150 User Manual preview
DS 150
Бренд: PAT Страницы: 31
OfiTE 800 Instruction Manual preview
800
Бренд: OfiTE Страницы: 24
TA Q Series Getting Started Manual preview
Q Series
Бренд: TA Страницы: 58
TANDBERG 15 Series General And Technical Information preview
15 Series
Бренд: TANDBERG Страницы: 53
Lumel N32H User Manual preview
N32H
Бренд: Lumel Страницы: 32
Oakton 150 Series Operating Instructions preview
150 Series
Бренд: Oakton Страницы: 4
IFR COM-120B Evaluation Manual preview
COM-120B
Бренд: IFR Страницы: 46
Energic Plus MPD-1007E Manual preview
MPD-1007E
Бренд: Energic Plus Страницы: 12
Jenoptik LDM51 Series Operating Manual preview
LDM51 Series
Бренд: Jenoptik Страницы: 54
socomec DIRIS Digiware D-40 Instruction Manual preview
DIRIS Digiware D-40
Бренд: socomec Страницы: 58
Solartron Mobrey MRL800 Installation & Maintenance Manual preview
MRL800
Бренд: Solartron Mobrey Страницы: 34
CAME BlueForce Smart Instructions For Use Manual preview
BlueForce Smart
Бренд: CAME Страницы: 24
ATIM ACW/LW8-TM0P User Manual preview
ACW/LW8-TM0P
Бренд: ATIM Страницы: 32
Kobold Heinrichs TSK Installation And Operating Instructions Manual preview
Heinrichs TSK
Бренд: Kobold Страницы: 27
OfiTE 130-85 Instruction Manual preview
130-85
Бренд: OfiTE Страницы: 6
Zamel exta LKM-02 Instruction Manual preview
exta LKM-02
Бренд: Zamel Страницы: 2
xDEEP BLACK BT User Manual preview
BLACK BT
Бренд: xDEEP Страницы: 57

Бренды по названию

Популярные бренды

Загрузить еще бренды