manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

53

SEQ

1.1

1.2

2.1

2.2

3.1

3.2

3.3

3.4

4.1

4.2

4.3

4.4

5.1

5.2

6.1

7.1

7.2

If you execute without checking this, only the template 
song you specified in step 

2

 will be loaded.

4

To load the template song, press the [F8] (“OK”) key. To 
cancel without loading, press the [F7] (“Cancel”) key. 
When you execute, song settings other than Play Loop 
and RPPR will be copied.

If in step 

3

 you checked “Copy Pattern to Track too?” 

and pressed the [F8] (“OK”) key, the “Copy Pattern To 
Track” dialog box will appear.

This dialog box is the same as in 5.1: RPPR, Pattern page, 
utility menu command “Copy To Track” (

☞

p.71).

5

In “Pattern,” select the pattern that you wish to copy. If 
you press the [START/STOP] key, the selected pattern 
will play.
In To “Track,” select the copy destination track.
In “Measure,” specify the beginning measure of the copy 
destination.

Track 1 

of all sixteen preset template songs contains a 

drum category program. (In preset template songs P02, 
P04, P08, and P15 drum category programs are speci-
fied for multiple tracks.)
The pattern names of the 150 preset patterns indicate 
the musical genre and part of the optimal drum cate-
gory program. (

☞

The table in the previous page)

For example in P00: Pop&Balad 1/Std, the musical 
genre is “Pop&Balad 1,” and “Std” is part of the name 
of the drum category program that is most suitable.
By loading the drum track for these preset template 
songs and the corresponding preset patterns, you can 
efficiently set up a drum track that is suited to each pre-
set template song.

6

To execute, press the [F6] (“Copy”) key. When you exe-
cute, “Measure” will count up automatically. You may 
then copy patterns as well. To exit the command, press 
the [F7] (“Exit”) key.

(Example)

Load preset template song P00: Pop/Ballade together 
with preset pattern P01: Pop&Balad 2/Std into song 
S000.

1

Select “Load Template Song” to access this dialog box.

2

In “From,” select P00: Pop/Ballade.

3

Check “Copy Pattern to Track too?”

4

Press the [F8] (“OK”) key to access the “Copy Pattern To 
Track” dialog box.

5

Set “Pattern” to Preset to select preset patterns, and 
select one of the patterns P00: Pop&Balad 1/Std–
P07: Pop&Balad 8/Std

 for the pattern name. (Preset tem-

plate song P00: Pop/Ballade specifies program A020: 
Standard Kit 1

 for track 1.) If you wish to play the 

selected pattern, press the [START/STOP] key. If you 
wish to adjust the tempo, use the [TEMPO] knob.
For this example, select P01: Pop&Balad 2/Std.

6

Set To:”Track” to 01, and “Measure” to 001.

7

Press the [F6] (“Copy”) key once. The eight-measure pre-
set pattern P01: Pop&Balad 2/Std has now been copied 
to the song. “Measure” will count-up automatically.

By repeating steps 

5

 and 

7

 you can continue to copy 

other patterns. When you press the [F7] (“Exit”) key, the 
dialog box will close.

Save Template Song (Save as User Template Song)

This command saves the program selections, track parame-
ters, and effect settings etc. of the song as a user template 
song U00–15.

1

Select “Save Template Song” to access the dialog box.

2

In “To,” specify the user template song (U00–15) in which 
the data will be saved.

3

To save the template song, press the [F8] (“OK”) key. To 
cancel, press the [F7] (“Cancel”) key.
Be aware that when you execute this command, all set-
ting data of the save destination User Template Song will 
be erased and rewritten.

FF/REW Speed

This allows you to set the speed at which fast-forward or 
rewind will occur when you press the [FF] key or [REW] 
key.

1

Select “FF/REW Speed” to access the dialog box.

2

In “Speed,” specify the speed (relative to the playback 
tempo) at which fast-forward and rewind will occur. 
With a setting of 2, this will occur at double the playback 
tempo; with a setting of 3, triple the tempo; and with a 
setting of 4, quadruple the tempo. However in sections 
where the playback data is dense, the fast-forward or 
rewind speed may slow down.

3

If “Ignore Tempo” is checked, the playback tempo and 
note length will be ignored, and fast-forward and rewind 
will be performed as fast as possible. The speed of fast-
forward and rewind will differ between sections where 
the playback data is dense and sections where it is sparse. 
If this item is unchecked, fast-forward and rewind will 
be performed at the speed you specify for “Speed.”

4

To execute the settings, press the [F8] (“OK”) key. To can-
cel, press the [F7] (“Cancel”) key.

Set Location (Set Location for Locate Key)

When you press the [LOCATE] key, you will move to the 
location specified here.

1

Select “Set Location” to access the dialog box.

2

In “Location,” specify the location to which you will 
move when you press the [LOCATE] key. If you specify 
001:01:000

, you will move to the beginning of the song 

when you press the [LOCATE] key.

3

To execute the settings, press the [F8] (“OK”) key. To can-
cel, press the [F7] (“Cancel”) key.

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

Igema G Installation And Operating Instructions Manual preview
G
Бренд: Igema Страницы: 30
z-laser ZX Series Operator'S Manual preview
ZX Series
Бренд: z-laser Страницы: 62
Cablescan 90 Series Reference Manual preview
90 Series
Бренд: Cablescan Страницы: 58
Camille Bauer SIRAX BM1450 Safety Instructions preview
SIRAX BM1450
Бренд: Camille Bauer Страницы: 11
Camille Bauer SINEAX AM1000 Device Handbook preview
SINEAX AM1000
Бренд: Camille Bauer Страницы: 83
Daewoo D-60 User Manual preview
D-60
Бренд: Daewoo Страницы: 17
Technoline EA 3000 Operating Manual preview
EA 3000
Бренд: Technoline Страницы: 1
AEMC 2120.81 User Manual preview
2120.81
Бренд: AEMC Страницы: 20
Kane KANE451 Manual preview
KANE451
Бренд: Kane Страницы: 52
International Light Technologies ILT2400 Operation Manual preview
ILT2400
Бренд: International Light Technologies Страницы: 19
Racelogic VBOX Touch Motorsport V1 Quick Start Manual preview
VBOX Touch Motorsport V1
Бренд: Racelogic Страницы: 15
PRESIDIUM PEGG User Handbook Manual preview
PEGG
Бренд: PRESIDIUM Страницы: 86
Seca 703s Instruction Manual And Guarantee preview
703s
Бренд: Seca Страницы: 280
Hall Research Technologies PGA-VHD User Manual preview
PGA-VHD
Бренд: Hall Research Technologies Страницы: 24
Kawai Piano Warranty Information Booklet preview
Piano
Бренд: Kawai Страницы: 2
hakel ISOLGUARD HIG93 Operating Instructions Manual preview
ISOLGUARD HIG93
Бренд: hakel Страницы: 15
OrienTek TFI-40 User Manual preview
TFI-40
Бренд: OrienTek Страницы: 2
Macnaught M50 ST. STEEL SERIES Instruction Manual preview
M50 ST. STEEL SERIES
Бренд: Macnaught Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды