manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

GLOBAL

1.1

2.1

3.1

4.1

5.1

6.1

GLOBAL

1.1

2.1

3.1

4.1

5.1

6.1

123

MFX1 Off

[Off, On]

On (checked):

 MFX1 will be disabled.

Off (unchecked):

 The Master Effect Setup page (7.2–1) 

“MFX1 On/Off” settings of Program, Combination, and 
Sequencer mode will be valid.

MFX2 Off

[Off, On]

On (checked):

 MFX2 will be disabled.

Off (unchecked):

 The Master Effect Setup page (7.2–1) 

“MFX2 On/Off” settings of Program, Combination, and 
Sequencer modes will be valid.

When “IFX On/Off,” or “MFX1 On/Off,” “MFX2 On/
Off” settings are switched, control change messages 
CC#92 (effect control 2), CC#94 (effect control 4), and 
CC#95 (effect control 5) will be transmitted respectively. 
The transmitted data will be 0 for off, and 127 for on.

1.1–1c: Auto Arp. (Auto Arpeggiator)

Program (Auto Arp. Program)

[Off, On]

On (checked):

 When a different program is selected, the 

arpeggiator settings stored in that program will automati-
cally take effect.
Off (unchecked):

 The arpeggiator settings will not change 

when the program is switched. Use this setting when you 
wish to keep the same arpeggiator pattern running while 
you select different program sounds.

Combi (Auto Arp. Combi)

[Off, On]

On (checked):

 When a different combination is selected, the 

arpeggiator settings stored in that combination will auto-
matically take effect.
Off (unchecked):

 The arpeggiator settings will not change 

when the combination is switched. Use this setting when 
you wish to keep the same arpeggiator pattern running 
while you select different combination sounds.

■

 1.1–1d: UTILITY

For details on how to select the desired utility function, refer 
to “PROG 1.1–1c: UTILITY.”

Write Global Setting

This command writes Global mode settings (except for 
Drum Kits and User Arpeggio Patterns).

1

Select “Write Global Setting” to access the dialog box.

2

To write the data, press the [F8] (“OK”) key. To cancel 
without writing, press the [F7] (“Cancel”) key.
You can also use the [REC/WRITE] key to write data in 
the same way as the “Write Global Setting” command.
Press the [REC/WRITE] key to access the “Update Glo-
bal Setting” dialog box, and press the [F8] key to write 
the data.

To write a drum kit or user arpeggio pattern, execute the 
appropriate utility. (

☞

5.1–1d “Write Drum Kits,” 6.1–1d 

“Write Arpeggio Patterns”)

Load Preload/Demo Data

This command loads the preloaded data and demo song 
data into internal memory. (

☞

VNL)

Before loading this data, you must uncheck the “Mem-
ory Protect” (1.1–2b) setting for the data that you want 
to load. If the setting is still checked when you attempt 
to load the data, a dialog box will indicate “Memory 
Protected,” and it will not be possible to load the data.

1

Select “Load Preload/Demo Data,” and access the dialog 
box.

2

In the “Kind” field, select the data that you want to load.

If you selected Program or Combination, move the cur-
sor down and select All, Bank, or Single to specify the 
range of data that will be loaded.
All

: Data for all programs or combinations will be 

loaded.
Bank

: Data will be loaded in units of one bank. In this 

case, move the cursor down and select the bank whose 
data you want to load.
Single

: Data for one program or combination will be 

loaded. In this case, move the cursor down to select the 
data that you want to load.
If you selected DrumKit or Arpeggio Pattern, move the 
cursor down and select either All or Single to specify the 
range of data that will be loaded.
All

: Data for all drum kits or arpeggio patterns will be 

loaded.
Single

: Data for one drum kit or arpeggio pattern will be 

loaded. In this case, move the cursor down to select the 
data that you want to load.

3

If you are loading in units of Bank or Single, use the 
“To” field to select the loading destination.

4

To load the data, press the [F8] (“OK”) key. To cancel 
without loading, press the [F7] (“Cancel”) key.

All (Preload PCG and 
Demo Songs)

All PCG (programs, combinations, drum 
kits, user arpeggio patterns, global set-
tings), and demo song data

All Preload PCG

All PCG (programs, combinations, drum 
kits, user arpeggio patterns, global set-
tings) data

All Demo Songs

All demo song data

Program All

All program data

Program Bank

All program data of a bank

Program Single

Data for one selected program

Combination All

All combination data

Combination Bank

All combination data of a bank

Combination Single

Data for one selected combination

DrumKit All

All drum kit data

DrumKit Single

Data for one selected drum kit

Arpeggio Pattern All

All arpeggio pattern data

Arpeggio Pattern Single

Data for one selected arpeggio pattern

Global Setting

Global setting data

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

Danfoss 40 Calibration Instruction preview
40
Бренд: Danfoss Страницы: 8
IFR COM-120B Evaluation Manual preview
COM-120B
Бренд: IFR Страницы: 46
Sage SIP Operation And Instruction Manual preview
SIP
Бренд: Sage Страницы: 68
Teledyne Analytical Instruments 3020 M Operating Instructions Manual preview
3020 M
Бренд: Teledyne Analytical Instruments Страницы: 107
KALEAS 34058 Operating Instruction preview
34058
Бренд: KALEAS Страницы: 64
Solartron Mobrey MRL800 Installation & Maintenance Manual preview
MRL800
Бренд: Solartron Mobrey Страницы: 34
DODODUCK Q63 Instruction Manual preview
Q63
Бренд: DODODUCK Страницы: 2
Spasciani M 900 ABEK 15 Instructions For Use Manual preview
M 900 ABEK 15
Бренд: Spasciani Страницы: 26
Seben 69003 Instruction Manual preview
69003
Бренд: Seben Страницы: 16
kruss DSA100 Installation And Operation Manual preview
DSA100
Бренд: kruss Страницы: 115
Lasertec HV3R Instruction Manual preview
HV3R
Бренд: Lasertec Страницы: 28
Bogen AKS16 Installation And Operating Instructions Manual preview
AKS16
Бренд: Bogen Страницы: 14
Kurzweil SP4 Series Musician'S Manual Addendum preview
SP4 Series
Бренд: Kurzweil Страницы: 12
Peavey Pacer 100 Owner'S Manual preview
Pacer 100
Бренд: Peavey Страницы: 4
SEAWARD Electronic Rigel 266 Plus Instruction Manual preview
Rigel 266 Plus
Бренд: SEAWARD Electronic Страницы: 57
Hanna Instruments HI 4112 Instruction Manual preview
HI 4112
Бренд: Hanna Instruments Страницы: 16
Hanna Instruments HI 95771C Instruction Manual preview
HI 95771C
Бренд: Hanna Instruments Страницы: 12
Geotech In-Situ Rugged TROLL 100 Operator'S Manual preview
In-Situ Rugged TROLL 100
Бренд: Geotech Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды