manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

20

5.1–2b: Amp Mod., LFO1 Mod., LFO2 Mod.

Indicates settings to specify how the volume of oscillator 1 
will be controlled by velocity, OSC1 LFO1, and OSC1 LFO2.

Amp Mod. (Amp Modulation):

Velocity Int. (Amp Velocity Int.)

[–99…+99]

With positive (+) values, the volume will increase as you 
play more strongly.
With negative (–) values, the volume will decrease as you 
play more strongly.

LFO1 Mod. (LFO1 Modulation):

Intensity (LFO1 Intensity)

[–99…+99]

These parameters let you use “OSC1 LFO1” (5.3–1) to con-
trol the oscillator 1 volume. 
Negative (–) values

 will invert the LFO waveform.

LFO2 Mod. (LFO2 Modulation):

Intensity (LFO2 Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “OSC1 
LFO2”(5.3–2) will have on the volume of oscillator 1. Refer 
to the preceding sections “LFO1 Mod. (LFO1 Modulation).”

5.1–2c: AMS, Int.

AMS (Amp AMS)

[Off, (PEG, FEG, EXT)]

Indicates the source that will control the volume of amp 1 
(

☞

p.212 “AMS List”) (EXT) Velocity cannot be selected.

Int. (AMS Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “AMS 
(Amp AMS)” will have.
The actual volume will be determined by summing the 
value of the changes produced by the amp EG with the val-
ues of Alternate Modulation etc., and if the levels of the amp 
EG are low, the modulation applied by Alternate Modula-
tion will also be less.
For example, if you set “AMS (Amp AMS)” to AfterT and 
press down on the keyboard, the volume will increase if you 
have set this parameter to a positive (+) value. However if 
the volume is already at maximum due to the EG settings 
etc., it will not be possible to increase the volume any fur-
ther. If you have set this parameter to a negative (–) value, 
pressing down on the keyboard will decrease the volume.

AMS (LFO1 AMS)

[Off, (PEG, FEG, AEG, KT, EXT)]

Indicates the source that will control the depth by which 
“OSC1 LFO1” (5.3-1) will modulate the volume of oscillator 
1 (

☞

p.212 “AMS List”).

Int. (AMS Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “OSC1 
LFO1” will have on the volume of oscillator 1. Negative (–) 
values

 will invert the LFO waveform.

AMS (LFO2 AMS)

[Off, (PEG, FEG, AEG, KT, EXT)]

Indicates the source that will control the depth by which 
“OSC1 LFO2” (5.3-2) will modulate the volume of oscillator 
1 (

☞

p.212 “AMS List”).

Int. (AMS Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “OSC1 
LFO2” will have on the volume of oscillator 1. Negative (–) 
values

 will invert the LFO waveform.

■

 5.1–2d: UTILITY

☞

“Write Program” (1.1–1c), “Copy Oscillator,” “Swap 
Oscillator” (2.1–1d)

5.1–3: EG 

(Amp1 EG) 

Indicates settings to specify how Amp 1 will cause the vol-
ume of oscillator 1 to change over time.

5.1–3a: Amp1 EG

These parameters specify how the amp 1 EG will change 
over time.

L (Level):

S (Start Level)

[00…99]

Specifies the volume level at note-on.
If you want the note to begin at a loud level, set this to a high 
value.

A (Attack Level)

[00…99]

Specifies the volume level that will be reached after the 
attack time has elapsed.

B (Break Point Level)

[00…99]

Specifies the volume level that will be reached after the 
decay time has elapsed.

S (Sustain Level)

[00…99]

Specifies the volume level that will be maintained from after 
the slope time has elapsed until note-off occurs.

Time:

A (Attack Time)

[00…99]

Specifies the time over which the volume will change after 
note-on until it reaches the attack level.
If the start level is 0, this will be the rise time of the sound.

D (Decay Time)

[00…99]

Specifies the time over which the volume will change from 
when it reaches the attack level until it reaches the break 
point level.

S (Slope Time)

[00…99]

Specifies the time over which the volume will change from 
when it reaches the break point level until it reaches the sus-
tain level.

Volume change (with positive (+) values of this parameter)

Softly played

Strongly played

Note-on

Note-off

Note-on

Note-off

5.1–3a

5.1–3b

5.1–3d

5.1–3c

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

A&D MF-50 Instruction Manual preview
MF-50
Бренд: A&D Страницы: 74
Hach DR 3900 Basic User Manual preview
DR 3900
Бренд: Hach Страницы: 145
Hach ORBISPHERE 410 Basic User Manual preview
ORBISPHERE 410
Бренд: Hach Страницы: 358
Hach Polymetron 9582sc Basic User Manual preview
Polymetron 9582sc
Бренд: Hach Страницы: 280
HACH LANGE DR 3900 Quick Reference Manual preview
DR 3900
Бренд: HACH LANGE Страницы: 15
Oldham MX 52 Commissioning, Operating And Maintenance Manual preview
MX 52
Бренд: Oldham Страницы: 96
GANN HYDROMETTE HB 30 Operating Instructions Manual preview
HYDROMETTE HB 30
Бренд: GANN Страницы: 65
Omega HHF144 User Manual preview
HHF144
Бренд: Omega Страницы: 26
AEMC 2120.81 User Manual preview
2120.81
Бренд: AEMC Страницы: 20
ROOTECH ACCURE 2350-GAS User Manual preview
ACCURE 2350-GAS
Бренд: ROOTECH Страницы: 26
THORLABS DC2100 Operation Manual preview
DC2100
Бренд: THORLABS Страницы: 49
TE Connectivity 549 AC Installation And Operating Instructions preview
549 AC
Бренд: TE Connectivity Страницы: 3
Leica Rangemaster CRF 1000 Instructions Manual preview
Rangemaster CRF 1000
Бренд: Leica Страницы: 118
SloanLED 601146 Installation Manual preview
601146
Бренд: SloanLED Страницы: 3
Hanna Instruments HI96725C Instruction Manual preview
HI96725C
Бренд: Hanna Instruments Страницы: 28
LaserLiner DistanceMaster Compact Operating Instructions Manual preview
DistanceMaster Compact
Бренд: LaserLiner Страницы: 14
inbody 370S User Manual preview
370S
Бренд: inbody Страницы: 36
ST Beta 10P Series Operating Manual preview
Beta 10P Series
Бренд: ST Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды