manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

70

Rename Pattern

Press the [F5] (“Name”) key to access the dialog box, and 
rename the selected pattern.
You may input up to sixteen characters. (

☞

BG p.43)

Step Rec (Loop)

Here you can perform step recording into a pattern.
This is available when a user pattern is selected.

1

In “Pattern Bank” and “Pattern Select,” specify the pat-
tern. By default, the pattern length is one measure. If you 
wish to change the number of measures in the pattern, 
set the Utility “Pattern Param.”

2

Select the “Step Rec (Loop)” to access the dialog box.

3

The remaining steps are the same as when step recording 
a track. Refer to steps 

3

 and following of “Step Record-

ing” (5.2–1b). However, step recording a pattern differs 
from step recording a track in that when you reach the 
end of the pattern, you will automatically return to the 
beginning of the pattern and continue recording, allow-
ing you to add more data.

Event Edit

Here you can edit individual events of the musical data in a 
pattern that you input.
Use “Pattern Bank” and “Pattern Select” to specify the pat-
tern that you wish to edit.
For the remaining steps, refer to “Event Edit” (5.2–1b).

Pattern Param. (Pattern Parameter)

This command specifies the number of measures and the 
time signature of the selected pattern.

1

Use “Pattern Bank” and “Pattern Select” to specify the 
pattern.

2

Select “Pattern Param.” to access the dialog box.

3

In “Length,” specify the number of measures in the pat-
tern.

4

In “Meter,” specify the time signature of the pattern. 
However, this time signature is only temporary, and 
when you “put” the pattern in a track of a song, the pat-
tern will play according to the time signature of that mea-
sure.

5

To execute the Pattern Parameter settings, press the [F8] 
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Erase Pattern

This command erases the musical data from the selected 
pattern.

1

Use “Pattern Bank” and “Pattern Select” to specify the 
pattern.

2

Select “Erase Pattern” to access the dialog box.

3

If you check “All Pattern,” all user patterns in the song 
will be erased.
If “All Patterns” is not checked, only the pattern speci-
fied in 

1

 will be erased.

4

To execute the Erase Pattern command, press the [F8] 
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Copy Pattern

This command copies the settings and musical data of the 
selected pattern to another pattern.
User patterns belong to a particular song, but you can use 
the Copy Pattern command to use a pattern in another song.
While preset patterns cannot be edited, you can copy a pre-
set pattern to a user pattern and then edit and save it as a 
user pattern. Be aware that when you execute the Copy Pat-
tern operation, the pattern settings and musical data of the 
copy destination will be erased.

1

Select “Copy Pattern” to access the dialog box.

2

In From: “Pattern,” specify the copy source pattern. (By 
default, this will be the pattern that was selected in the 
page.)

3

In To: “Song” and “Pattern,” specify the copy destination 
song and pattern. For “Pattern,” only user patterns U00–
U99

 can be specified.

4

To execute the Copy Pattern command, press the [F8] 
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Bounce Pattern

This command combines the musical data of the bounce 
source pattern and bounce destination pattern, and places 
the combined musical data in the bounce destination. The 
time signature and length of the pattern following execution 
will be according to the settings of the bounce destination.
If MIDI control data exists in the selected pattern and in the 
bounce destination pattern, the resulting playback following 
the bounce operation may produce unexpected results. We 
recommend that you use “Event Edit” (5.1–1c) to prepare 
the MIDI control data of the two patterns before executing 
the Bounce Pattern command.

1

Use “Pattern Bank” and “Pattern Select” to specify the 
bounce source pattern.

2

Select “Bounce Pattern” to access the dialog box.

3

In From “Pattern,” select the bounce source pattern. (By 
default, the pattern that are selected in the page will be 
chosen.)

4

In To: “Song” and “Pattern,” select the bounce destina-
tion song and pattern. For “Pattern,” only user patterns 
U00–U99

 can be specified.

5

To execute the Bounce Pattern command, press the [F8] 
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Note number

Location within the 
measure (beat, clock)

Length (beat, clock)

Time signature

Velocity

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

Bacharach MGS-401 User Manual preview
MGS-401
Бренд: Bacharach Страницы: 19
Oceanic EOS Service Procedure preview
EOS
Бренд: Oceanic Страницы: 17
J.P. Instruments EDM-900 Pilot'S Manual Addendum preview
EDM-900
Бренд: J.P. Instruments Страницы: 9
J.ASSY VISUM Monitor Technical Manual preview
VISUM Monitor
Бренд: J.ASSY Страницы: 13
Keithley SourceMeter 2400 User Manual preview
SourceMeter 2400
Бренд: Keithley Страницы: 594
Keithley System SourceMeter 2601B Reference Manual preview
System SourceMeter 2601B
Бренд: Keithley Страницы: 864
Labgear S201 User Manual preview
S201
Бренд: Labgear Страницы: 8
Keithley SourceMeter 2600B Series Reference Manual preview
SourceMeter 2600B Series
Бренд: Keithley Страницы: 897
LaserLiner LaserRange-Master T4 Pro Manual preview
LaserRange-Master T4 Pro
Бренд: LaserLiner Страницы: 68
LaMotte DC1500 CHLORINE User Manual preview
DC1500 CHLORINE
Бренд: LaMotte Страницы: 60
Wavetronix 0537 Using Manual preview
0537
Бренд: Wavetronix Страницы: 14
Rae NeutronRAE II User Manual preview
NeutronRAE II
Бренд: Rae Страницы: 38
FlowLine LI21-1001 Manual preview
LI21-1001
Бренд: FlowLine Страницы: 2
Sagola Classic I 2 Instruction Manual preview
Classic I 2
Бренд: Sagola Страницы: 16
KEM RA-620 Operation Manual preview
RA-620
Бренд: KEM Страницы: 49
Nicols TWIN LASER GB II Instructions For Use Manual preview
TWIN LASER GB II
Бренд: Nicols Страницы: 22
Casio Privia PX-860BK User Manual preview
Privia PX-860BK
Бренд: Casio Страницы: 67
HOKUYO AUTOMATIC UBG-05LN Instruction Manual preview
UBG-05LN
Бренд: HOKUYO AUTOMATIC Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды