manualshive.com logo in svg

Korg TRITON Le, Руководство по параметрам

Korg TRITON Le - Превосходный синтезатор с множеством функций и звуков. Для полной настройки и использования, скачайте бесплатное Руководство По Обслуживанию на manualshive.com. Гарантированное качество и легкость в использовании. Наслаждайтесь музыкой с Korg TRITON Le!

Поделиться
Скачать
background image

122

RPN fine tune messages will be received on the MIDI 
channel for each timbre (in Combination mode) or track 
(in Sequencer mode). (

☞

“Detune,” “Transpose”: 

COMBI 3.1–3a, SEQ 3.1–5(6)a.)

Velocity Curve

[1…8]

This specifies the way in which the volume and/or tone will 
change in response to how hard the keyboard is struck 
(velocity).
When “Convert Position” (2.1–1a) is PreMIDI, variations in 
keyboard playing dynamics will affect the velocity effect 
and the transmitted velocity data as shown in the left-hand 
diagram on the following page. Incoming data will automat-
ically use the velocity curve number 4 shown in the right-
hand diagram.
With a setting of PostMIDI, variations in keyboard playing 
dynamics and in the velocity of incoming data will create 
change as shown in the right-hand diagram on the following 
page. If you are playing this instrument’s tone generator 
from an external keyboard or sequencer, and the overall 
sound is too bright or too dark, you can set the “Convert 
Position” parameter to PostMIDI and select the appropriate 
velocity curve here. For the transmitted data, the velocity 
curve number 4 shown in the left-hand diagram will auto-
matically be selected.

1...3: 

These curves produce an effect for strongly-played 

notes.
4(Normal):

 This is the standard curve.

5, 6:

 An effect will be obtained even if you do not play very 

strongly
7:

 A certain amount of effect will be obtained even for softly-

played notes
8:

 This curve produces the most regular effect. This setting is 

suitable when you do not need velocity sensitivity, or when 
you wish to make the notes more consistent. However with 
this curve, control of softly-played notes will be more diffi-
cult, so use the curve that is most appropriate for your play-
ing strength and style, and the effect that you wish to 
produce.
The default factory setting for this parameter is 4.

AfterT Curve (AfterTouch Curve)

This specifies the way in which the volume and/or tone will 
change in response to variations in pressure (after touch) 
applied to the keyboard while holding down a key.

When “Convert Position” (2.1–1a) is PreMIDI, variations in 
after touch pressure will affect the after touch effect and the 
transmitted after touch data as shown in the left-hand dia-
gram below. Incoming data will automatically use the after 
touch curve number 3 shown in the right-hand diagram.
With a setting of PostMIDI, variations in after touch pres-
sure and in the value of incoming after touch data will create 
change as shown in the right-hand diagram. For the trans-
mitted data, the after touch curve number 3 shown in the 
left-hand diagram will automatically be selected.

1, 2

: These curves produce an effect for strongly-applied 

pressure.
3(Normal): 

This is the standard curve.

4, 5:

 This curve produces change even when light pressure is 

applied
6, 7:

 Since these will change in 24 and 12 levels respectively, 

they are suitable for use when you are recording aftertouch 
on a sequencer and want to limit memory consumption. (Set 
“Convert Position”) to PreMIDI.) Curve number 7 allows 
change over twelve steps, so when using after touch to mod-
ify the pitch, you can set the range of modification to one 
octave, and use after touch to vary the pitch in semitone 
steps.
8:

 This is a random curve. Use this when you wish to create 

special effects, or to use after touch to apply unpredictable 
modulation.
The default factory setting for this parameter is 3.

When “Convert Position” (2.1–1a) is PreMIDI, the set-
ting you make here will be applied immediately after 
the keyboard, meaning that it will affect the data trans-
mitted via MIDI, but will not affect the received data.

With a setting of PostMIDI, the setting you make here 
will be applied immediately before this instrument’s 
internal tone generator, meaning that it will affect the 
data received via MIDI, but will not affect the transmit-
ted data.
When you use this instrument’s keyboard to play the 
internal tone generator, the “Convert Position” setting 
will make no difference.

1.1–1b: FX SW

IFX Off

[Off, On]

On (checked):

 Insert effect IFX will be disabled.

Off (unchecked):

 The Setup page (PROG/COMBI 7.1–2, 

SEQ 7.1–3, SMPL 7.1–1) “IFX On/Off” setting of Program, 
Combination, Sequencer, and Sampling (if the EXB-SMPL 
option is installed) modes will be valid.

For a setting of PostMIDI

1

MAX

127

Velocity 
effect

Velocity (MIDI In

→

TG)

1

8

6

5

4

3

2

7

For a setting of PreMIDI

Soft

127

Strong

1

Velocity (KBD

→

MIDI Out)

1

2

3

8

6

5

4

7

3

4

5

7

2

1

6

For a setting of PreMIDI

Soft

127

Strong

0

After Touch (KBD

→

MIDI Out)

8:RANDOM

1

For a setting of PostMIDI

0

MAX

127

Aftertouch
effect

After Touch (MIDI In

→

TG)

3

4

5

7

2

6

8:RANDOM

Содержание TRITON Le














































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Le

Kawai ES100 Technical Speci? Cations preview
ES100
Бренд: Kawai Страницы: 5
Jata hogar 80 Instructions Manual preview
80
Бренд: Jata hogar Страницы: 12
E-line CJ-HDR104 User Manual preview
CJ-HDR104
Бренд: E-line Страницы: 164
Kawai EP3 Owner'S Manual preview
EP3
Бренд: Kawai Страницы: 66
Omicron Lab SPECTANO 100 Quick Start Manual preview
SPECTANO 100
Бренд: Omicron Lab Страницы: 33
Omicron Lab Bode 100 Detailed Functional & Calibration Check preview
Bode 100
Бренд: Omicron Lab Страницы: 21
Omicron Lab OTMC 100 Quick Start Manual preview
OTMC 100
Бренд: Omicron Lab Страницы: 22
Vectornav VN-100 User Manual preview
VN-100
Бренд: Vectornav Страницы: 114
Valhalla Scientific 4300B Operation Manual preview
4300B
Бренд: Valhalla Scientific Страницы: 43
WAGNER Datamaster Manual preview
Datamaster
Бренд: WAGNER Страницы: 9
Watts HF Scientific AccUView LED Ex Quick Start Manual preview
HF Scientific AccUView LED Ex
Бренд: Watts Страницы: 2
Cecomp F20B Instruction Manual preview
F20B
Бренд: Cecomp Страницы: 4
LOVATO ELECTRIC DMED302 Instruction Manual preview
DMED302
Бренд: LOVATO ELECTRIC Страницы: 10
e-sylife Gas Module Installation Manual preview
Gas Module
Бренд: e-sylife Страницы: 2
Kawai CP67 Owner'S Manual preview
CP67
Бренд: Kawai Страницы: 36
Keller LEO2-Ei Manual preview
LEO2-Ei
Бренд: Keller Страницы: 8
Dakota Digital VHX-68C-CVL Manual preview
VHX-68C-CVL
Бренд: Dakota Digital Страницы: 38
Swema SwemaAir 40 Instructions preview
SwemaAir 40
Бренд: Swema Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды