Konica Minolta Drypro 832, Руководство по обслуживанию

Страница: 380 / 530

Chapter 16 MainteTool
16-50
The “PRINT I/O TEST” window contains the following items:
Next proceed to “16.10.1 Measuring Laser Beam Intensity (Page 16-51)” and measure laser beam intensity.
No. Setup Item Description of Setting
CYCLE
1 UPDATE CYCLE Set the timing at which the condition of the polygon motor and laser diode is
checked.
CONDITION
2 POLYGON Set the rotation condition of the polygon motor.
ON Set the rotation of the polygon motor to ON.
OFF Set the rotation of the polygon motor to OFF.
3 POLYGON TIME Set the rotation time of the polygon motor.
Setting range: 0 - 99
4 LD
Set the emitting state of the polygon motor.
ON Set emission of the polygon motor to ON.
OFF Set emission of the polygon motor to OFF.
5 LD OUT Set the light intensity to be output.
6 [START] button Starts operation of the polygon motor and laser diode as set.
RESULT
7 POLYGON
Displays the operating state of the polygon motor.
8 LD Displays the operating state of the laser diode.
9 VSYNC SIGNAL
Displays the state of the V-Sync signal.
10 HSYNC SIGNAL Displays the state of the H-Sync signal.
11 POLYGON LOCK
SIGNAL Displays the state of the POLYGON LOCK signal.
12 POLYGON FASE
Displays the state of the face detection signal.
13 [EXIT] button Close the “PRINT I/O TEST” to return to menu.