Chapter 11 Replacing Loading Parts in Main Unit
11-15
4
Remove the MEC (mechanical control) box
cover.
• Four screws (M3
×
6)
5
Remove the connectors (MCN1, MCN2, MCN4, MCN5, MCN7, MCN8, MCN9, MCN11,
MCN13, MCN14, MCN15, MCN16, MCN22, MCN23, MCN24, MCN25, MCN26, and MCN28)
from the MEC board.
6
Remove the MEC board.
• Six screws (M4
×
8)
Remove the screws and the board supports in two positions
to remove the board.
7
Install a new MEC board.
• Six screws (M4
×
8)
8
Connect the connectors (MCN1, MCN2, MCN4, MCN5, MCN7, MCN8, MCN9, MCN11,
MCN13, MCN14, MCN15, MCN16, MCN22, MCN23, MCN24, MCN25, MCN26, and MCN28)
removed in
step 5
.
9
Install the MEC box cover removed in
step 4
.
• Four screws (M3
×
6)
10
Install the rear cover with reference to
“
Installation Procedure (Page 3-19)”
in
“3.3.4
Removing/Installing Rear Cover”
.
Caution
When removing the connector, do not pull by the wires, but hold the tab on the connector with
your fingers. Pulling by the wires too tightly can cause a break.
Caution
Be sure to push the connector all the way in when connecting it.
If the connector is not connected properly, an error will occur and, in some cases, smoke and/or
an odor may be generated.
Содержание Drypro 832
