Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 71 / 128

68
3
En
vir
onment Set
tings/Other Set
tings
„
Measurement Angle
Select the measurement angle.
Memo
All six measurement angles are set under the initial settings.
Operating Procedure Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
1
Use [

] or [

] to move the cursor to “Measurement
angle”, and then press the [Confirmation] key.
The <Measurement angle> screen is displayed.
2
Use [

] or [

] to move the cursor to the
measurement angle to be set, and then press the
[Confirmation] key. Measurement will be performed
only at the specified angle.
Selections
„ {
-15°
„ {
15°
„ {
25°
„ {
45°
„ {
75°
„ {
110°
3
After selecting the angle, use [

] or [

] to move the
cursor to “ON”, and then press the [Confirmation]
key.
The selection is confirmed and the screen returns to the
<Measurement setup> screen
.
Notes
• If [ESC] is pressed without pressing the
[Confirmation] key, the settings will not be changed
and the screen will return to the previous screen.
• Be sure to select at least three angles.
Sample
Measurement cond.
Measurement setup
Measurement angle
Manual average option
Manual save
Manual average
1 Times
Auto average
1 Times
Sample
Measurement cond.
Measurement setup
Measurement angle
Manual average
Manual save
Manual average
Auto average
Measurement angle
OK Cancel
-15°
15°
25°
45°
75°
110°