Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 67 / 128

64
3
En
vir
onment Set
tings/Other Set
tings
„
Change List Position
Specifying sample numbers allows for specified sample to be selected without the need to scroll the screen.
Setting Procedure Start the procedure from the <Sample menu> - <Data management> screen.
1
Use [

] or [

] to move the cursor to “Change list
position”, and then press the [Confirmation] key.
The <Change list position> screen is displayed.
2

and

will be displayed above and below the data
number. Use [

] or [

] to specify a value. Use [

]
or [

] to move between digits.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Sample> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Notes
Numbers with no measurement data cannot be selected.
Data management
Sample
Sample menu [0013]
0002 TARGET-2
Delete data
Change list position
Change Target reference
0002 TARGET-2
Set Sample as Target
Data management
Sample
Sample menu [0013]
0002 TARGET-2
Delete data
Change list position
Change Target reference
0002 TARGET-2
Set Sample as Target
Change list position
2016/8/25 16:18:04
0010: TARGET-10
/ 0 1 0 0 1 3