Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 77 / 128

74
3
En
vir
onment Set
tings/Other Set
tings
„
Observer/Illuminant 2
Select the secondary illuminant used for MI (metamerism index) calculation, etc.
Memo
Observer/Illuminant 2 is set to “None” under the initial settings.
Operating Procedure Start the procedure from the <Measurement cond.> - <Observer/Illuminant> screen.
1
Use [

] or [

] to move the cursor to “Observer/
Illuminant 2”, and then press the [Confirmation] key.
The <Observer/Illuminant 2> screen is displayed.
2
Use [

] or [

] to move the cursor to the desired
item.
Settings
„ {
The setting values are the same as those for “Observer/
Illuminant 1” and “None”.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Observer/Illuminant> screen
.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Observer/Illuminant> screen.
Sample
Measurement cond.
Observer/Illuminant
Observer/Illuminant 2
None
Observer/Illuminant 1
10°/D65
Sample
Measurement cond.
Observer/Illuminant
Observer/Illuminant 2
None
Observer/Illuminant 1
10°/D65
Observer/Illuminant 2
10°/C
10°/D50
10°/D65
10°/F2
10°/F6
10°/F7
10°/F8
10°/F10
10°/F11
10°/User
10°/F12
None