Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 114 / 128

111
„ {
Instrument Preparations
Connecting the Bluetooth module to the instrument, and turn ON the instrument’s Bluetooth function (USB host).
(Refer to page 105)
„
Registering a Bluetooth Address
Operating Procedure Start the procedure from the <Setting> - <Communication setup> screen.
1
Use [  ] or [  ] to move the cursor to “Printer address”, and then press the [Confirmation] key.
The <Printer address> screen
is displayed.
Communication setup
Sample
Setting
0002 TARGET-2
Bluetooth
ON
Meter PIN code
0000
Printer address
000000000000
Auto print
ON
2
Enter the address of the Bluetooth device to be connected.
Sample
0002 TARGET-2
0123456789AB
Printer address
0 1 2 3 4 5
A B C D E F
6
OK Cancel
7 8 9
×
3
After inputting the characters, move the cursor to [OK] and press the [Confirmation] key.
The printer will be registered as an I/O device for the instrument, and the display will return to the
<Communication setup> screen .
Memo
If [ESC] is pressed during configuration, or if the cursor is moved to “Cancel” and the [Confirmation] key is pressed,
the settings will not be changed, and the screen will return to
the <Communication setup> screen
.