Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 70 / 128

67
„ „
Measurement Option Settings
To set measurement options, select “Measurement setup” from the <Measurement cond.> menu screen. Select or
specify the following items as the measurement options:
• Measurement angle (-15°, 15°, 25°, 45°, 75°, 110°) : Specify the measurements angle.
• Auto average (1 to 10) : Specify the number of measurements for auto averaging.
• Manual average (1 to 10) : Specify the number of measurements for manual averaging.
• Manual average option (Manual save/Auto save) : Select the save method when performing manual averaging.
• Tilt detection (OFF/ON)
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [

] or [

] to display the
<Measurement cond.> menu screen.
Memo
To return to the
previous screen
, press
[MENU] or [ESC]
.
2
Use [

] or [

] to move the cursor to “Measurement
setup”, and then press the [Confirmation] key.
The <Measurement setup> screen is displayed.
3
After setting the measurement conditions, press the
[ESC] button to return to the previous screen.
Sample
Measurement cond.
Measurement setup
Display cond.
Observer/Illuminant
Sample
Measurement cond.
Measurement setup
Measurement angle
Manual average option
Manual save
Manual average
1 Times
Auto average
1 Times