Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 117 / 128

114
4
Other F
unctions
„
Auto Print
Measurement results can be automatically printed for every measurement.
Notes
• The instrument must be connected to the printer in advance.
• The optional accessory Bluetooth printer CM-A234 can only print text. Difference graphs and other selected
graphs displayed on the instrument cannot be printed.
Memo
Auto print is set to “OFF” under the initial settings.
Operating Procedure Start the procedure from the <Setting> - <Communication setup> screen.
1
Use [

] or [

] to move the cursor to “Auto print”,
and then press the [Confirmation] key.
The <Auto print> screen is displayed.
2
Use [

] or [

] to move the cursor to “ON”, and then
press the [Confirmation] key.
The Auto Print function will turn ON, and printing will be
performed every time measurement is performed. After the
settings have been configured, the display will return to the
<Communication setup> screen .
Print Example 1
Measurement Data / Color Difference Target Color Data output
S/N 0123456
SAMPL D001 FAIL
(SAMPLE name)
10/D65 FF 99.99
L* a* b*
-15 30.12
10.09 1.00
15 31.23 11.98 2.11
25 32.34 12.87 3.22
45 33.45 13.76 4.33
75 34.56 14.65 5.44
110 35.67 15.54 6.55
2014/01/01 09:00:00
T001 (TARGET name)
Serial No.
Measurement Data / Color Difference Target Color Data, Pass/Fail Result
Measurement Data / Color Difference Target Color Data name
Observer/Illuminant 1, FF value
Display showing only values for selected angles
Color space (L*a*b* / L*C*h)
Measurement date/time
Target reference information
Print Example 2
Color Difference Data output
S/N 0123456
SAMPL D001 FAIL
(SAMPLE name)
10/D65 FF 99.99
dE*ab
-15
0.1
15 0.1
25 0.1
45 0.1
75 0.1
110 0.1
dL* da* db*
-15 30.12
10.09 1.00
15 31.23 11.98 2.11
25 32.34 12.87 3.22
45 33.45 13.76 4.33
75 34.56 14.65 5.44
110 35.67 15.54 6.55
2014/01/01 09:00:00
T001 (TARGET name)
w
x
x
x
Serial No.
Measurement Data / Color Difference Target Color Data
Measurement Data / Color Difference Target Color Data name
Observer/Illuminant 1, FF value
Display showing only values for selected angles
Color space
Measurement date/time
Target reference information
Communication setup
Sample
Setting
0002 TARGET-2
USB host
OFF
Auto print
OFF
Meter PIN code
00000000
Printer address
000000000000
Memo
If the color difference result is “Fail”, an “×” will be printed after the value. If the
value approaches the tolerance, “w” is appended after the value (refer to page 56
for more on warning levels).