Konica Minolta CM-M6, Инструкция по эксплуатации

Страница: 51 / 128

48
3
En
vir
onment Set
tings/Other Set
tings
„ „
Print
Print the target color data. The instrument must be connected to the serial printer in advance. For instructions on
how to connect the instrument to a serial printer, refer to page 108 “Connecting to a Printer”.
Notes
• If a proper connection is not established, printing will not be possible.
• Even if the connection has been correctly established, printing may fail for reasons such as the printer being
turned off when printing is attempted.
Display the target color to be printed on the <Target> screen in advance.
Operating Procedure Start the procedure from the <Target menu> screen.
1
Use [

] or [

] to move the cursor to “Print data”,
and press the [Confirmation] key to display the
<Print data> screen under the <Target menu>.
Printing will begin from the connected printer.
When the printing is complete, the screen returns to the
<Target> screen .
Notes
The <Print data> screen under the <Target menu> is also
displayed when printing will not be processed properly
such as when the printer is not correctly connected.
Target menu [0002]
Target
Print data
Delete all data
Data management
Edit name
TARGET-2