Kongsberg Simrad CS90, Справочное руководство

Страница: 85 / 686

442700/A
83
Related topics
Operating panels, page 35
Operating procedures, page 79
Getting started, page 80
Hull Unit Control dialog box, page 505
Turning off the CS90 system
When you do not use the CS90 system, turn it off. Select
Power Off
on the top bar to turn
off the CS90 system. You can also use the
Power
button on the Operating Panel. You must
never turn off the CS90 system by means of the on/off switch on the Processor Unit.
Procedure
1 Select
Power Off
on the top bar.
In the
Power Off
dialog box, select
Power off
or
Exit to Operating System
.
•
Power Off
turns off the Processor Unit and the Transceiver Unit.
•
Exit to Operation System
closes the CS90 program.
• Both functions will also retract the transducer.
or:
2 On the Operating Panel, press
Power
, and keep it depressed for a few seconds.
In the
Power Off
dialog box, select
Power off
or
Exit to Operating System
.
3 Wait while the CS90 program closes and the Transceiver Unit is turned
off.
4 Turn off the display.
If required, refer to the instructions provided by the display manufacturer.
Related topics
Operating panels, page 35
Operating procedures, page 79
Getting started, page 80
Lowering and hoisting the transducer from the user interface, page 82
Operating procedures