Kongsberg Simrad CS90, Справочное руководство

Страница: 521 / 686

442700/A
519
Details
Installed Outputs
The
Installed Outputs
box lists
all the currently selected outputs.
To remove or edit an output type,
select it in the
Installed Outputs
box.
• Select
Remove
to delete the
output.
• Select
Edit
to change the
settings.
• Select
New
to add a new output.
Output
Select which marker type to export.
Port
Select the Ethernet port or serial port you want to use for the communication.
Inspect Port
Select
Inspect Port
to check the communication parameters for the port. The relevant
port setup dialog box opens. You are not permitted to make any changes.
You can not define the communication port parameters here. If you need to adjust
these, you must select
I/O Setup
after you have defined the data output parameters.
The
I/O Setup
page is located in the
Installation
and
Output
dialog boxes.
Monitor
Select
Monitor
to open the
Port Monitor
dialog box. The
Port Monitor
dialog box
allows you to study the communication stream on the chosen serial line or local area
network (LAN) port.
Targets
Select which datagram format(s) to export.
MDS (Measured Data Shoal)
Simrad MDS is a proprietary datagram format created by Kongsberg Maritime.
It contains the location, bearing and depth of a tracked target. All information is
presented relative to your own vessel. All data are related to the tracked target.
Functions and dialog boxes