Kongsberg Simrad CS90, Справочное руководство

Страница: 41 / 686

442700/A
39
(F)
Cursor
The
Cursor
buttons offer menu and cursor control.
Menu
This is an "on/off" function. Unless you need to make frequent changes to
the operating parameters, you may want to hide the menu from the display
presentation. This gives you more space for echo information. When the
menu is hidden, it is temporarily shown on the left or right side of the display
presentation if you move the cursor to that position.
Select
Press
Select
to make a selection in a menu or dialog box. This corresponds to the
left button on a normal computer mouse.
View
The
View
button opens the shortcut menu in the active view. This corresponds to
the middle button on a computer mouse
Object
The
Object
button opens the shortcut menu in the active view. This corresponds
to the right button on a computer mouse
Trackball
Use the trackball to control the cursor in the user interface.
(G)
Tilt
The
Tilt
buttons allow you to control the vertical angle of the sonar beams.
Manual
Press
Manual
to control the vertical angle of the sonar beams with the two arrow
buttons.
Auto
This is an "on/off" function. When Auto Tilt mode is activated the beam will
automatically change its tilt angle for each transmission ("ping").
The centre of the tilt sector is defined by the chosen tilt angle just before the
Auto Tilt mode is started. The chosen tilt sector is shown on the tilt indicator
in the Horizontal view using a shaded background.
Sector limits are adjusted by pressing and holding the
Auto
button and
simultaneously pressing the
Tilt up
or
Tilt down
(arrow) buttons
(H)
Various
Use the
Various
buttons to make screen captures and zoom in on details.
Getting started