Kongsberg Simrad CS90, Справочное руководство

Страница: 515 / 686

442700/A
513
Input
This column identifies the external sensor (any type of "measuring device") that
is currently connected to the port. To choose what type of device to import
data from, select
Input
under the table.
LAN Ports
This table shows the Ethernet (LAN) ports you have available. Each Ethernet adapter
supports any number of network ports. Select
Add
to add a new port.
Ports that have not been initiated correctly have a red background colour.
Name
This is the given identity of the network (LAN) port. By default, the ports are
numbered.
Remote IP Address
The
Remote IP Address
is the Internet Protocol (IP) address for a peripheral
device. If the data communication between your system and the peripheral
device is set up to only import data from the device, the remote IP address is not
required. If you want to export information to one or more peripheral devices
(
Broadcast mode), set
Remote IP Address
to 255.255.255.255. This is the default
setting. If you want to use point-to-point communication in a closed network,
set the remote IP address manually.
Remote Port
The
Remote Port
is important if you want to export information from the
Processor Unit to a peripheral device on the local area network (LAN). The
application on the peripheral device will "listen" to this port number. If you want
to establish
point-to-point communication for data import from a peripheral
device on the network, you may need to define the network port on this device.
To find the port number on the peripheral device, consult the documentation for
the device, and/or the application to be used on it. In most cases, this peripheral
device is another computer on a local area network (LAN).
Protocol
This is the current protocol specified for the port. Each port can receive multiple
datagrams simultaneously, provided that they all use the same protocol.
Input
This column identifies the external sensor (any type of "measuring device") that
is currently connected to the port. To choose what type of device to import
data from, select
Input
under the table.
Functions and dialog boxes