Kongsberg Simrad CS90, Справочное руководство

Страница: 335 / 686

442700/A
333
Vertical view
The Vertical view is oriented perpendicularly to the horizontal plane. The view shows you a
"vertical slice" of the echo data. The direction of the slice is the same as the current bearing.
The area covered by the vertical beam is shown as a triangle in the
Horizontal view. The
upper horizontal line in the view represents the water surface.
How to open
At the bottom of the display presentation, select a suitable presentation mode, and activate
the
Vertical view.
A The current tilt is shown with a solid
line.
B
The range rings are shown as dotted
lines.
C
Horizontal dotted lines show the depth
intervals.
D
The distance and depth of the cursor
location is shown in the lower left
corner of the view.
Description
By default, the vertical views have the transducer located in the upper left corner of the view.
The presentation is made from left towards right.
Tip
The
Vertical View Orientation
page allows you to decide whether the vertical views should be
presented from right to left, or from left to right. This page is located in the
Display Options
dialog box. This dialog box is opened from the
Display
menu.
Certain presentation modes provide more than one vertical view. You can then set up these
views individually.
Although the presentation of the echoes is most important in this view, it also contains
a number of other objects. These provide you with additional functionality, as well as
information that is useful or important while using the CS90 sonar system.
User interface