Kohler 4.5EFOD Скачать руководство пользователя страница 9

Страница: 9 / 60

TP-6252 2/08

Introduction 9

Introduction

This manual provides operation instructions for 6EOD,

4.5EFOD, 8--32EOZD, and 6.5--27EFOZD model

generator sets.

Refer to the engine operation manual for generator set

engine scheduled maintenance information.

Information in this publication represents data available

at the time of print. Kohler Co. reserves the right to

change this publication and the products represented

without notice and without any obligation or liability

whatsoever.

Read this manual and carefully follow all procedures

and safety precautions to ensure proper equipment

operation and to avoid bodily injury. Read and follow the

Safety Precautions and Instructions section at the

beginning of this manual. Keep this manual with the

equipment for future reference.

The generator set specification sheets provide specific

generator and engine information. Refer to the spec

sheet for data not supplied in this manual. Consult the

generator set service manual, engine operation manual,

and engine service manual for additional specifications.

Obtain copies of the latest spec sheets, manuals,

diagrams,

and

drawings

from

your

local

distributor/dealer.

The equipment service requirements are very important

to safe and efficient operation. Inspect the parts often

and perform required service at the prescribed intervals.

Obtain service from an authorized service

distributor/dealer to keep equipment in top condition.

Before installing a marine generator set, obtain the

most current installation manual from your local

distributor/dealer. Only qualified persons should

install the generator set.

Содержание 4.5EFOD





























































Результаты поиска

Содержание 4.5EFOD

Отзывы:

Похожие инструкции для 4.5EFOD

Бренды по названию

Популярные бренды

Kohler 4.5EFOD, Операция

Результаты поиска

Содержание 4.5EFOD

Отзывы:

Похожие инструкции для 4.5EFOD

Бренды по названию

Популярные бренды