Kohler 4.5EFOD Скачать руководство пользователя страница 32

Страница: 32 / 60

TP-6252 2/08

32 Section 3 Scheduled Maintenance

3.6 Fuel System

3.6.1 Fuel Specifications

Use a clean, good quality diesel fuel oil with a cetane

number of 45 or greater. Clean fuel prevents the diesel

fuel injectors and pumps from clogging.

Fuel Recommendations

United States

ISO 8217 DMA, BS 2869 A1 or A2

United Kingdom BS 2869-1983, Part 2 Class A2
Germany

DIN 51 601-1978

Japan

JIS. No. K2204-2

Note:

Never store diesel fuel in galvanized containers;

diesel fuel and the galvanized coating react

chemically to produce flaking that quickly clogs

filters or causes fuel pump or injector failure.

Note:

Avoid storing fuel for more than one month. Take

special precautions to keep all dirt, water, and

other contaminants out of fuel to prevent the

growth of microbes. Microbes form slime that

clogs the fuel filter and lines.

Note:

Do not run the generator set out of fuel because

the fuel lines will draw in air and necessitate

bleeding the fuel system before restarting the

unit.

3.6.2 Fuel Filter

The quality and condition of the fuel largely determine

the filter’s useful life. Replace the fuel filter element as

listed in the service schedule. Section 1 shows the

typical location of a fuel filter. Use the applicable

procedure below to replace the fuel filter.

Fuel Filter Cleaning/Replacement Procedure

8--9EOZD and 6.5--7EFOZD Models:

1. Close the fuel supply valve.

2. Remove the collar from the fuel filter adapter while

holding the filter bowl in place.

3. Remove the filter bowl and fuel filter. Clean the fuel

filter with fresh diesel fuel and blow compressed air

from the inside outward. Replace a damaged fuel

filter. Dispose of the fuel filter in an approved

manner.

4. Wipe off all parts with a clean rag. Inspect all

mating surfaces and threads for damage; replace

as necessary.

5. Place the fuel filter into the filter bowl and lubricate

the rubber seal with fresh diesel fuel.

6. With the collar against the filter bowl flange,

position the fuel filter against the adapter and

hand-tighten the collar.

7. Wash hands after any contact with fuel oil.

8. Open the fuel supply valve.

9. Bleed the system. See Section 3.6.3, Bleeding the

Fuel System.

6EOD, 10--32EOZD, 4.5EFOD, and 9--27EFOZD

Models:

1. Close the fuel supply valve.

2. Loosen the fuel filter by turning it counterclockwise.

Remove the fuel filter and use rags to clean up

spilled fuel oil. Dispose of the fuel filter in an

approved manner.

3. Clean the contact surface of the fuel oil filter

adapter.

4. Lightly lubricate the gasket surface of the new fuel

filter with fresh fuel oil. Thread the filter on the

adapter until the gasket makes contact;

hand-tighten the filter an additional one-half turn.

Wash hands after any contact with fuel oil.

5. Open the fuel supply valve.

6. Bleed the system. See Section 3.6.3, Bleeding the

Fuel System.

Содержание 4.5EFOD





























































Результаты поиска

Содержание 4.5EFOD

Отзывы:

Похожие инструкции для 4.5EFOD

Бренды по названию

Популярные бренды

Kohler 4.5EFOD, Операция

Результаты поиска

Содержание 4.5EFOD

Отзывы:

Похожие инструкции для 4.5EFOD

Бренды по названию

Популярные бренды