Kohler 4.5EFOD Скачать руководство пользователя страница 23

Страница: 23 / 60

TP-6252 2/08

Section 3 Scheduled Maintenance

3.1 General Maintenance

Accidental starting.

Can cause severe injury or death.

Disconnect the battery cables before

working on the generator set.

Remove the negative (--) lead first

when disconnecting the battery.

Reconnect the negative (--) lead last

when reconnecting the battery.

WARNING

Disabling the generator set. Accidental starting can

cause severe injury or death.

Before working on the

generator set or connected equipment, disable the generator

set as follows: (1) Move the generator set master switch to the

OFF position. (2) Disconnect the power to the battery charger.

(3) Remove the battery cables, negative (--) lead first.

Reconnect the negative (--) lead last when reconnecting the

battery. Follow these precautions to prevent starting of the

generator set by an automatic transfer switch, remote

start/stop switch, or engine start command from a remote

computer.

Hazardous voltage.

Can cause severe injury or death.

Operate the generator set only when

all guards and electrical enclosures

are in place.

Moving parts.

WARNING

Servicing the generator set when it is operating. Exposed

moving parts can cause severe injury or death.

Keep

hands, feet, hair, clothing, and test leads away from the belts

and pulleys when the generator set is running. Replace

guards, screens, and covers before operating the generator

set.

NOTICE

Saltwater damage.

Saltwater quickly deteriorates metals.

Wipe up saltwater on and around the generator set and

remove salt deposits from metal surfaces.

NOTICE

The engine and generator set may use both American

Standard and metric hardware. Use the correct size

tools to prevent rounding of the bolt heads and nuts.
See the Safety Precautions and Instructions at the

beginning of this manual before attempting to service,

repair, or operate the generator set. Have an authorized

distributor/dealer perform generator set service.

Engine Service.

Perform generator set engine service

at the intervals specified by the engine operation

manual.

Generator Set Service.

Perform generator set service

at the intervals specified by the generator set operation

manual.

If the generator set operates under dusty or dirty

conditions, use

dry

compressed air to blow dust out of

the alternator. With the generator set running, direct the

stream of air in through the cooling slots at the alternator

end.

Routine Maintenance.

Refer to the following generator

set service schedule, the engine service schedule, and

the runtime hours shown on the ADC 2100 to determine

when to schedule routine maintenance. Service more

frequently generator sets that are subject to extreme

weather or dusty or dirty conditions.

Service Log.

Use the Operating Hour Service Log

located in the back of this manual to document

performed services.

Service Schedule.

Perform maintenance on each item

in the service schedule at the designated intervals for

the life of the generator set. For example, an item

requiring service every 100 hours or 3 months also

requires service after 200 hours or 6 months, 300 hours

or 9 months, and so on.

Содержание 4.5EFOD





























































Результаты поиска

Содержание 4.5EFOD

Отзывы:

Похожие инструкции для 4.5EFOD

Бренды по названию

Популярные бренды

Kohler 4.5EFOD, Операция

Результаты поиска

Содержание 4.5EFOD

Отзывы:

Похожие инструкции для 4.5EFOD

Бренды по названию

Популярные бренды