7
.
EtherNet/IP Connection Procedure
24
7.3.3. Transferring the Project Data
Go online with Sysmac Studio and transfer the project data to the Controller.
Regardless of the operating mode of the CPU Unit, devices or machines may
perform unexpected operation when you transfer any of the following data from
Sysmac Studio: a user program, configuration data, setup data, device
variables, or values in memory used for CJ-series Units.
Always confirm safety at the destination node before you transfer the project
data.
1
Turn ON Controller.
2
Select
Check All Programs
from the Project Menu.
3
The Build Tab Page is
displayed.
Check that "0 Errors" and "0
Warnings" are displayed.
4
Select
Rebuild Controller
from
the Project Menu.
5
The dialog box on the right is
displayed. Check the contents
and click
Yes
.
6
Check that "0 Errors" and "0
Warnings" are displayed on the
Build Tab Page.
7
Select
Communications Setup
from the Controller Menu.
Содержание F Series
Страница 49: ...46 ...
Страница 50: ...2018 0118 0118 P691 E1 01 ...