7
.
EtherNet/IP Connection Procedure
10
7. EtherNet/IP Connection Procedure
This section describes the procedures for connecting the Manifold Solenoid Valve and the
Controller via EtherNet/IP. The explanations of the procedures for setting up the Controller
and the Manifold Solenoid Valve given in this guide are based on the factory default settings.
For the initialization, refer to
Section 8. Initialization Method
.
7.1. Work Flow
Take the following steps to connect the Manifold Solenoid Valve and the Controller via
EtherNet/IP to perform tag data links.
7.2. KOGANEI Manifold Solenoid
Valve Setup
Set up the KOGANEI Manifold Solenoid Valve.
↓
7.2.1. Hardware Settings
Connect the cables to the Manifold Solenoid Valve.
↓
7.2.2. Parameter Settings
Set the IP address of the Manifold Solenoid Valve.
↓
7.3. Controller Setup
Set up the Controller.
↓
7.3.1. IP Address Settings
Start Sysmac Studio and set the IP address of the
Controller.
↓
7.3.2. Setting Global Variables
Set a global variable to use for tag data links, and
create and export a CSV file in order to use as a tag
with Network Configurator.
↓
7.3.3. Transferring the Project Data
Go online with Sysmac Studio and transfer the
project data to the Controller.
↓
7.4. Network Settings
Set EtherNet/IP tag data links.
↓
7.4.1. Starting Network Configurator
and Installing the EDS file
Start Network Configurator and install the EDS file.
↓
7.4.2. Uploading the Network
Configuration
Go online with Network Configurator and upload the
network configuration.
↓
7.4.3. Tag Registration
Import the created CSV file for use with Network
Configurator, and register a tag.
↓
Содержание F Series
Страница 49: ...46 ...
Страница 50: ...2018 0118 0118 P691 E1 01 ...