5
.
Applicable Devices and Device Configuration
7
Precautions for Correct Use
When there is an icon file specific to the device, the icon file and the EDS file must be stored
in the same folder.
Precautions for Correct Use
Update Sysmac Studio and Network Configurator to the versions specified in this
Clause 5.2.
or to higher versions. If you use a version higher than the one specified, the procedures and
related screenshots described in
Section 7.
and subsequent sections may not be applicable.
In that case, use the equivalent procedures described in this guide by referring to the
Sysmac
Studio Version 1 Operation Manual
(Cat. No. W504) and
Network Configurator Online Help
.
Additional Information
For power supply specifications for the switching hub, refer to the
Switching Hub
W4S1-series Users Manual
(Cat. No. 0969584-7).
Additional Information
For power supply specifications for the Manifold Solenoid Valve, refer to the
EtherNet/IP
Compliant Serial Transmission Compatible Manifold User’s Manual
(BK-HV045).
Additional Information
The system configuration in this guide uses USB for the connection between the personal
computer and the Controller. For information on how to install the USB driver, refer to
A-1
Driver Installation for Direct USB Cable Connection
of the S
ysmac Studio Version 1
Operation Manual
(Cat. No. W504).
For NX1P2 Controllers, there is no need to install the USB driver because they do not have a
USB port.
Additional Information
The NX1P2 Controller, if used, should be connected to your personal computer with an
Ethernet cable. For information on how to connect the cable, refer to
6-2 Going Online with a
Controller
of the
Sysmac Studio Version 1 Operation Manual
(Cat. No. W504).
Additional Information
In this guide, ''BOOTP/DHCP Tool'' by Rockwell Automation Inc. is used to set the IP address
of the Manifold Solenoid Valve.
"BOOTP/DHCP Tool" can be downloaded from the Rockwell Automation Inc. website.
Содержание F Series
Страница 49: ...46 ...
Страница 50: ...2018 0118 0118 P691 E1 01 ...