8
.
Initialization Method
44
8.2. Initializing a KOGANEI Manifold Solenoid Valve
To initialize the settings of a KOGANEI Manifold Solenoid Valve, execute the reset service
(factory default settings) to a Manifold Solenoid Valve using the explicit message
communications service.
The following example shows how to initialize with Network Configurator.
(1)Connect the devices as shown in the connection diagram below, and set the IP address
using Network address setting switch and Host address setting switch on Manifold Solenoid
Valve. “192.168.0.100” is given as an example of the IP address.
Set the IP address of your personal computer to 192.168.0.*, the first 3 octets of which must
be the same as the IP address of Manifold Solenoid Valve.
“192.168.0.10” is given as an example of the IP address.
(2)Start Network Configurator on your personal computer. Select
Select Interface
-
Ethernet
I/F
from the Option Menu.
Select
Connect
from the Network Menu to connect to the network.
(3)Select
Setup Parameters
from the Tools Menu. The Setup Parameters Dialog Box is
displayed. Set parameters as shown below and click
Send
to execute the reset service
(factory default settings) to Manifold Solenoid Valve.
Power supply for Manifold Solenoid Valve
Switching hub
IP address: 192.168.0.10
IP address: 192.168.0.100
Switching hub power supply
Содержание F Series
Страница 49: ...46 ...
Страница 50: ...2018 0118 0118 P691 E1 01 ...