Chapter 6
GTD-110/150
Using the menu
6-2
0093151542-06
GPS MONITOR
To monitor GPS reception and health status
DRAWING
To create a boundary line, dangerous zone, etc. by
combining lines.
MOVEMENT
To move the node of a drawing using the
cursor or the values (lat/lon or LOP)
ADDITION
To add the node of a drawing using the
cursor or the values (lat/lon or LOP)
DRAWING
EDIT
CURSOR/
VALUE
ERASE
To erase the node of a drawing using the
cursor or the values (lat/lon or LOP)
DRAWING ERASE
To erase drawings created by the user
DRAWING
DRAWING RECALL
Turning drawings on and off
TRACK COLOR SETTING
Setting track color (Normal or Water temperature)
OTHER SHIP’S PLOT SETTINGS
Setting other ship’s data
STORE
To save the data into the User C-Card
RECALL
To recall the data from the User C-Card
ERASE
To cancel the data stored in the User C-Card
USER C-CARD
FORMAT
To format the User C-Card
NEAREST PORT
To view the Nearest port info
SIMULATION
To perform a simulated plotting function
SYSTEM TEST
Operation test
COLOR PALETTE
OPERATION
To select and adjust the color tone
DATA
COMMUNICATION
Communication with another GTD-110/150 unit in terms
of mark data, etc
FLASH ROM
ERASE
To erase data stored in the Flash ROM (Read Only
Memory)
MAINTENANCE
LANGUAGE
To change the language
6.
1.
1 Basic menu operation
(1) Press the MENU key to display the menu.
(2) Move the Joystick up or down to select a menu
item.
(3) Press the Joystick to the right to enter a sub
setting menu.
(4) Select or set up the setting item in the sub menu.
Figure 6.1 Main Menu
