GTD-110/150
Chapter 5
Basic Operation
0093151542-06
5-15
5.7.2 Setting a waypoint by the cross cursor
(1) Press the CUR key to display the cross cursor.
(2) Operate the Joystick to move the cross cursor on to the point to be assigned as a waypoint.
(3) Press the GOTO key. (The cross cursor can be moved even after the GOTO key is pressed)
(4) Press the ENT key. The point assigned by the cross cursor is set as a waypoint.
(5) If there is a mark-registered point on the screen, place the cross cursor on the mark and press the
GOTO key. The marked point is set as a waypoint.
5.7.3 Resetting a waypoint by a mark number
(1) Press the GOTO key. The “Waypoint setting” pop-up window will appear with prompt.
(2) Operate the Joystick up or down to select the number of the point to become a waypoint.
(3) Press the ENT key. The point assigned is set as the waypoint.
NOTE:
To use this function, the points to be assigned as waypoints must be mark-registered in
advance.
This point is to be set as a waypoint.
The No. 115 point is now set as a waypoint.
Figure 5.16 Setting waypoints by registered marks
Place the cross cursor on to the point.
The assigned point is set as a
waypoint.
Figure 5.17 Setting the waypoints by the cross cursor
