Chapter 6
GTD-110/150
Using the menu
6-18
0093151542-06
6.6.1 Distance/Speed
Selects the units of distance and speed shown on the screen.
Selections: nm
､
kt / km
､
km/h
Initial setting: nm
､
kt
6.6.2 PLOT INTERVAL
Selects either time interval or distance interval for plotting. The smaller the value, the finer the plots are,
but this consumes memory. Select an appropriate plotting interval taking these points into account.
Selections:
Time: 1 second - 600 seconds
Distance: 0.01nm - 10.0nm
Initial setting: 10 seconds
6.6.3 NUMBER OF PLOTS
This function is used to set up the upper limit of plotting numbers. Plots are erased on a first-in first-out
basis.
Selections: 2000, 4000, 7000 points
Initial setting: 7000 points
6.6.4 AVERAGE SPEED and AVERAGE NUMBER
This function is used to stabilize the speed display when own ship is moving at low speed. Increasing
the number of the averaging index stabilizes the indication but sacrifices the response to the speed
variation.
Selections:
AVERAGE SPEED: NO
AVERAGE NUMBER: 01 - 60
Initial setting:01
Figure 6.18 SYSTEM SETTINGS menus
