GTD-110/150
Chapter 7
Route/Mark navigation
93151542-00
7-1
Chapter 7 Route/Mark navigation
7.1 Routes
This paragraph describes the methods concerning route creation and edition.
7.1.1 Creating a route
There are three methods available to create the route in the GTD-110/150. These are; using the cross
cursor, specifying a point (lat/lon or LOP) and using the registered Mark number. Details are given in the
following paragraphs.
7.1.1.1 Creating a route using the cross cursor
(1) Press the menu key to display the MENU window.
(2) Press the Joystick up or down to highlight ROUTE.
(3) Press the Joystick to the right to enter the ROUTE
sub menu.
(4) Press the Joystick up or down to highlight
ROUTING. (Figure 7.2)
(5) Press the Joystick to the right to enter the
ROUTING sub menu.
(6) Press the Joystick up or down to highlight
CURSOR. (Figure 7.3)
(7) Press the Joystick to the right. The ROUTING
(Route Name Registration) menu will appear. The
route number 1 is automatically assigned, which is
shown in the menu. (Figure 7.4)
(Route name registration)
(1) Press the Joystick down to highlight COMMENT.
(2) Press the Joystick to the right to enter the font
type.
(3) Enter texts using the apha-numeric keys (See
NOTE) and press the ENT key to fix the entry.
(Figure 7.5) The maximum number of texts are 12.
In case you press the ENT key without the entry of
a comment, the current date will be entered
automatically as shown below.
R
RTE YY. MM. DD
RTE:
Route
YY: The lower 2 digit year
MM: Number of month
DD:
day
Figure 7.3 ROUTING menu
Figure 7.2 ROUTE menu
Figure 7.1 MENU window