GTD-110/150
Chapter 5
Basic Operation
0093151542-06
5-17
5.8 Marking the POB (Person Over Board) location
This is an emergency event function to mark the location of an accident such as a man overboard. To
use this function, simply press the POB key. The POB point is marked with its position
(latitude/longitude), bearing and distance (nm) shown at the bottom of the screen.
5.8.1 Resetting the POB point
To renew the POB point, press the POB key and then press the ENT key. A new POB point will be set
with a POB mark and its latitude and longitude are shown on the screen.
5.8.2 Canceling the POB
(1) Press the POB key.
(2) Press the CLR key. The POB mark is deleted and the POB display is changed to ship’s current
position.
5.9 Changing the screen top direction
(1) Press the NAV key. The NAV window will be shown in the screen.
(2) Operate the Joystick up or down to select a picture orientation mode.
(3) Press the ENT key. The picture will be set to the selected mode.
Figure 5.21 Resetting the POB point
Figure 5.22 Changing the screen top direction
