Kodak s1740, Руководство пользователя

Страница: 56 / 86

4-4 A-61593 September 2007
EDS30 Endorser. Data
received too late The command to start the endorser was received too late or the
encoding string is too long relative to the length of the document.
Solutions :
• If possible, shorten the endorsing text.
• Place the endorsing text in the middle of the document instead of the
beginning. The value of the field position should not be 0; there should
be no blanks at the beginning.
• Place the print command in an earlier hook.
EDS32 Endorser. Gap too
small The gap between two documents was too small.
Solution : Collect the two documents and refeed.
EDS35 Endorser. Ink supply
reaching end The ink is running out.
Solution : Load a new ink cartridge after the current run has finished.
EDS40 Endorser. Too much
data The encoding string is too long.
Solution : Shorten the encoding string.
EDS60 Endorser not ready. The endorser is not ready.
Solution : Wait a minute and try feeding again.
EDS99 Endorser error. Reason
unknown Internal error.
Solution : Close the run and try again.
EDS101 MZI, was offline The MLE (Multi Line Endorser) is offline.
EDS102 MZI, parity error Internal error.
Solution : Call Service.
EDS103 MZI, order not allowed
in this state Internal error.
Solution : Call Service.
EDS104 MZI, invalid command
number Internal error.
Solution : Call Service.
EDS105 MZI, invalid parameter Internal error.
Solution : Call Service.
EDS109 MZI, command too late Internal error.
Solution : Call Service.
EDS110 MZI, buffer overflow Internal error.
Solution : Call Service.
EDS111 MZI, timeout Internal error.
Solution : Call Service.
EDS120 MZI, option not
available The Endorser may not be installed.
Solution : Check parameters.
EDS121 MZI, too much lines to
print in output text Too many lines.
Solution : Reduce the number of lines.
EDS122 MZI, output can’t be
placed on document The coordinates are not in the valid area.
Solution : Check to be sure the alignment of the coordinates match with
the physical size of the document.
EDS123 MZI, invalid font ID There are problems with the font.
Solution : Check the font.
EDS124 MZI, invalid graphic ID There are problems with the graphic.
Solution : Check the graphic.
EDS125 MZI, invalid fixtext ID There is a problem with the fixed text.
Solution : Check the fixed text.
EDS126 MZI, invalid printing
quality The default printing quality of the endorser or the printing quality from the
application is not valid.
Solution : Check the print quality.