3-10
A-61593 September 2007
3. Select
Encode codeline without amount
and click
OK
.
4. Insert some blank documents into the feeder and click
Continuous
Feed.
The scanner will start feeding the documents and encoding
them with
OnUs
and
Transit.
5. When you have encoded enough documents, click
OK.
The Document List will be displayed.
NOTES:
• The
Encoding
field displays the text to be encoded. If this field is
blank, no encoding will be done.
• Successful encoding is indicated by
+ENC
in the
OPTIONSSTATUS
field.
The documents that were just encoded can now be used for second
pass encoding.
6. Click
Finish Run
.
7. Select
Convert
. When the Convert main screen is displayed, click
Refresh
to update the Task Table.
8. Click
Start Batch Processing
to start the conversion. A task file
and rct file will be created for second pass encoding. The task file is
named “Tray000000nPass2.task.xml” and the rct file is named
“Trayn.RCT.xml”, where
n
is the number of the tray in both names.
9. Click
Transfer
. When the Transfer main screen is displayed, click
Refresh
to update the Task Table.
10. Click
Start Batch Processing
to start the transfer. A task file will be
copied to the
ProSort\Task\Scan
directory. The rct file will be copied
to the
ProSort\Table\Scan
directory.
11. Click
Scan
. When the Run Selection window is displayed, click
Refresh
to update the Document List.
12. Select the
TraynPass2 (1/1)
run (where
n
is the number of the tray).
NOTE: If there is no Run Definition for a given task file, the run is
marked with an asterisk (*). The highlighted color shows the
state of the task file.
Color
State
Description
Black
Open
You can open the run.
Green
Closed
The run is finished and the task file can
be deleted.
Red
Hard-locked
The run is in progress.
