3-14
A-61593 September 2007
• The display area is divided in two parts. The upper part shows the
Lookahead
. This is the view in the rct file (the expected documents).
The lower part is the Document List.
• The Look Ahead button will also be displayed on the toolbar. Clicking
on the
Look Ahead
button will make the Lookahead information
disappear. If you click on the
Look Ahead
button again, the
Lookahead information will be redisplayed.
10. Feed some documents. The fields of the scanned documents
appear in the Document List. If the document matched an entry in
the Lookahead, the line Lookahead is also highlighted in green.
11. Feed in all documents. If a document could not find a match, the
scanner will stop and display the following message,
Too many
mismatches
and the documents will be transported to the overflow
pockets.
12. Compare the documents in white on the Lookahead with the
documents that caused the jam. These documents must match. Put
the jammed documents in the feeder in the correct order again,
select the document in white in the Lookahead and select
Match
selected item
, then select
Continuous Feed
.
When all documents are successfully processed, the Lookahead
will be all green and the message
Last Doc in Lookahead
matched
will be displayed.
13. Close the run and remove the documents in ascending pocket
number out of the pockets and put them back into the feeder.
14. Select
Next Run
of this fine sort, in this example:
Tray20Pass2_Run(2/3)
, and process the documents again.
