4-10
A-61593 September 2007
NBM58
Endorser (0):single
commands not
supported
Single commands are not supported on all type scanners (e.g., TWAIN).
Solution
: Use scanner-specific endorser actions only.
NBM59
Endorser (0):error in
command line
Error during paring of endorser command line.
Solution
: Check the command line.
NBM60
Pockets not empty
A check on empty pockets was requested by the run configuration and a
pocket is not empty.
Solution
: Clear the pockets and disable
Check on empty pockets
in
the run configuration.
NBM101
ScanControl: Can’t
start feed
Consecutive error
Solution
: See the first entry in Machine Status.
NBM102
ScanControl: Can’t
stop feed
Consecutive error
Solution
: See the first entry in Machine Status.
NBM103
ScanControl: Can’t get
parameters
Consecutive error
Solution
: See the first entry in Machine Status.
NBM104
ScanControl: Can’t set
parameters
Consecutive error
Solution
: See the first entry in Machine Status.
NBM105
ScanControl: Can’t set
overflow
Consecutive error
Solution
: See the first entry in Machine Status.
NBM106
ScanControl: Can’t
clear track
Consecutive error
Solution
: See the first entry in Machine Status.
NBM107
ScanControl: Can’t
rollback
Consecutive error
Solution
: See the first entry in Machine Status.
NBM108
ScanControl: Can’t get
state
Consecutive error
Solution
: See the first entry in Machine Status.
NBM109
ScanControl: Can’t set
action
Consecutive error
Solution
: See the first entry in Machine Status.
NBM110
ScanControl: Can’t get
license
Consecutive error
Solution
: See the first entry in Machine Status.
NBM111
Scan Control: No
command/event
response. Check for
scanning documents
not shown in Document
List
No response from machine interface layer. Idle state forced by timeout.
Solution
: Internal problem. Capture and send Logs.
NBM112
Scan Control: Can’t set
machine log
The machine logging cannot be done due to an initialization error.
Solution
: Check the scanner .dll file and the log parameter.