Kodak s1740, Руководство пользователя

Страница: 60 / 86

4-8 A-61593 September 2007
NBM19 Unexpected Textdata-
Data received for Doc
(1) OCR2 not initialized.
Solution : Close the run and reset the scanner.
NBM20 Missing ink for encoder Ink cartridge is empty.
Solution : Change the ink cartridge.
NBM21 Missing ink for
endorser Ink cartridge is empty.
Solution : Change the ink cartridge.
NBM22 Wrong pocket
command Doc (1) Value in the Destination field is invalid.
Solution : Check the Run Definition.
NBM23 Document height ({0}
mm) more than 115
mm for Doc (1) A document with a height more than 115 mm had a destination for a
small pocket.
Solution : Check the Run Definition to be sure that the assignments are
correct for large documents.
NBM24 Stop forced by logic The Stop field is set to _TRUE .
Solution : Check the Run Definition. The reason for this message is
probably displayed in the GUI_Message field.
NBM25 Destination set to
Overflow by logic for
Doc (1).
An assignment in the Run Definition in the Destination system field is set
to w or u .
NBM26 Removal of Doc (1)
and above requested
by Logic Informational . The customer logic requested a complete removal of all
documents in the tray (JAM=TRAY).
NBM27 Can’t remove actual
tray. Doc (1) is not in
scope. The customer logic requested a complete removal of all documents in
the tray cannot be performed (REMOVE=TRAY) because the start tray is
no longer in the scope of the item buffer. The processing will change to
standard handling (REMOVE=_TRUE).
NOTE: Be aware of the limitations of the buffer size, tray size of the logic
request (REMOVE=TRAY).
NBM28 Machine recovery
aborted. Can’t proceed. The machine recovery was stopped before completion. The recovery of
the run failed.
Solution : Check for additional status information for the cause of the
problem.
NBM30 Endorser 1 failed for
Doc (1) The scanner did not endorse the document.
Solution : Refeed the document.
NBM31 Endorser 2 failed for
Doc (1) The scanner did not endorse the document.
Solution : Refeed the document.
NBM32 Encoder 1 failed for
Doc (1) The scanner did not encode the document.
Solution : Refeed the document.
NBM36 Deposit data missing at
Doc (1) The document does not have any deposit data available.
Solution : Refeed the document.
NBM40 Missing image (0) data
for Doc (1) An image for a document was not delivered properly.
Solution : Scan the document using Single Feed .
NBM41 Paused for
synchronizing with text
output The scanner paused because the text output was too slow.
Solution : Check for active processes which may not be part of the
application.
NBM42 Paused for
synchronizing with
image output The scanner paused because the image server was too slow.
Solution : Check for active processes which may not be part of the
application.