3-16
A-61593 September 2007
The Lookahead window
and buttons
Following is a controlled runs window showing the Lookahead
information.
The three buttons you will access when using Lookahead are described
below. Use these buttons if the document(s) can not be identified
because of poor quality of if something is missing.
Mark Lookahead
— the documents highlighted in white (Lookahead
interval) below the selected document will be deleted.
Create selected item
— the expected document is damaged and
cannot be processed. Put the document (or a substitute) into the
requested pocket and click
Create selected item
. The information will
be copied from the control file and placed in the correct fields. By doing
this, the text output of this document will be written and a substitute
image will be created in the image output. The value of the system field
MANUAL_MATCHED is incremented.
Match selected item
— the expected document is damaged and
cannot be processed. Identify the document and click
Match selected
item
. The information will be copied from the control file and placed in
the correct fields. By doing this, unmatched documents can be
processed and encoded or endorsed.
