2-14
A-61593 September 2007
Status bar
The status bar provides the current status of the scanner and is divided
into 5 areas.
Scanner
State
— the scanner can be in one of the following states:
NOTE: For more information see the section entitled, “Handling
Document Jams” in Chapter 3
.
Current tray status
— provides the number of documents in the
current tray and the number of documents fed during the current run.
ID number
— provides the identification number of the current tray.
Message line
— provides a message to the operator regarding the
current state of the scanner.
Messages button
— displays the machine status messages. These
messages are color coded:
Scanner State
Description
Idle
• When the scanner is not feeding documents.
• If you press the
Pause
button.
• If the feeder is empty.
NOTE:You can close or cancel a run or
manually change the tray in the
Idle
state.
Active
Documents are being fed and scanned.
Jam
A physical jam has occurred (e.g., a paper clip
is on one or more documents) and the transport
has been blocked. The track must be cleared of
documents before proceeding.
Track Clearing
After a physical jam, press the
Clear Track
button to start the transport and deposit any
remaining documents within the track to the
overflow pockets. Any documents that are still
jammed must be manually removed.
Jam Handling
This state requires you to verify the Document
List. Any documents that are jammed must be
fed and scanned again. After all documents
have been verified, they need to be marked as
OK
or deleted.
Severity
Error
Warning
Information
Color
Red
Yellow
Green
