background image

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

What is Scanning? . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What is Searching? . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Types of Communications . . . . . . . . . . . . . . . . . . . . . 3

Feature Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Where to Obtain More Information . . . . . . . . . . . . . . . . . 5
Included with Your Scanner. . . . . . . . . . . . . . . . . . . . . . . 6
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . 7
AC Adapter/Charger . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Charging Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adapter Safety Feature . . . . . . . . . . . . . . . . . . . . . . . 9
Flexible Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting the Squelch . . . . . . . . . . . . . . . . . . . . . . . . . 10
Keylock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Duplicate Frequency Alert . . . . . . . . . . . . . . . . . . . . 14
Programming Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Channel Lockout. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Lockout in Manual Mode . . . . . . . . . . . . . . . . . . . . . 17
Locking a Channel While Scanning . . . . . . . . . . . . . 18
Lockout Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Restore a Locked Out Channel . . . . . . . . . . . . . . . . 19
Restore All Locked-out Channels . . . . . . . . . . . . . . . 20

Priority Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Changing the Priority Channel . . . . . . . . . . . . . . . . . 22

Chain Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setting a Search Range . . . . . . . . . . . . . . . . . . . . . . 23
Search Hold Feature . . . . . . . . . . . . . . . . . . . . . . . . 26
Channel Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Storing Search Frequencies . . . . . . . . . . . . . . . . . . . 27

Weather Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 31

General Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Birdies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Accessories and Replacement Parts. . . . . . . . . . . . . . . 35
One Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . 36

1

Содержание BC60XLT-1






































Отзывы: