Suspension Arm Systems Independant
10
Revision 1
Extension arm with pre-assembled IDP 401 ceiling tube, Single arm
−
1 extension arm in the lengths 600, 800, 1,000 and 1,200 mm
Pre-installed components
−
1 power cable for power supply
−
Supply cable for electromagnetic brake
−
1 signal cable for electromagnetic brake (in protective tube)
−
2 earthing cables 4 mm²
Included components
−
1 setscrew M16 DIN EN ISO 4028, 2 ball stops Ø 12.7 mm
−
2 cover flaps, for extension arm
Extension arm fastening elements
−
12 hexagonal nuts M16 and 6 spring washers, 12 washers, external Ø 34 mm, 12 plastic
insulating washers and 6 threaded bolts M16 x 330 mm
For assembly, see section 7.3 “Mounting the Extension Arm on the Threaded Bolts of the
Interface Plate”, page 58.
Longer ceiling tube for IDP 401
−
1 ceiling tube (customized length)
−
1 earthing cable 4 mm²
Included components
−
1 socket wrench extension (only for ceiling tube lengths 500 and 700 mm)
Fastening elements for additional ceiling tube
−
8 Allen cylinder screws M10 x 25 mm (8.8) DIN EN ISO 4762
−
8 retaining washers S10
For pre-assembly, see section 7.2 “Pre-assembly: Mounting the Longer Ceiling Tube on the
Extension Arm”, page 53.
IDP 401 console tube
−
1 console tube (customized length)
Pre-installed components
−
1 earthing cable 4 mm²
Fastening elements for console tube
−
1 fastening plate 8 x M10
−
8 countersunk screws with hexagon socket M10 x 20 mm (10.9) DIN EN ISO 10642
For assembly, see section 7.4 “Mounting the Console Tube on the Extension Arm”,
page 65.