Suspension Arm Systems Independant
66
Revision 1
7.4.2
Mounting the Console Tube on the Extension Arm
The illustration shows a magnified sectional
view of the extension arm without its top side.
•
Push the fastening plate 8 x M10 from
the front side into the extension arm
,
and position it.
•
Position the console tube
under the
extension arm
,
in a way that the
stop in the console tube
points away
from the side of the extension arm and the
fastening holes are aligned.
Fig. 7-19:
Mounting the console tube on the extension arm
Determining the swiveling area
If the M6 service head is to be swiveled to the left (in counter-clockwise direction):
•
Install the console tube as seen in the illustration with the stop on the right side.
If the M6 service head is to be swiveled to the right (in clockwise direction):
Install the console tube with the stop on the left side.
The console tube is freely positionable on eight mounting positions according to the customer's
specifications.
WARNING
Danger of injury due to the suspension arm system falling!
Wrongly assigned fastening elements can cause the suspension arm system to fall:
•
Assign the right cylinder screws to the console tube
.
