99
3. Montaż / podłączenie do instalacji elektrycznej
3.6 Instalacja / podłączenie kabla
Przewody przyłączeniowe należy podłączyć
zgodnie ze schematem połączeń . W tym
celu odpowiednią uszczelkę połączenia
skręcanego kabla przebić wkrętakiem (rysu-
nek a), przeprowadzić przewód (rysunek b)
i zacisnąć (rysunek c). Następnie n akrętkę
połączenia kabla dociągnąć mocno ręką (ry-
sunek d).
Przy podłączeniu kontaktu bezpotencjało-
wego należy przestrzegać danych technicz-
nych.
W połączeniach, przez które nie będą
prowadzone przewody, czyli w miej-
scach, gdzie nie jest konieczne podłącza-
nie przewodu, nie wolno przebijać
uszczelek. Służą one do uszczelniania
obudowy .
WAżNE:
Wszystkie kable podłączone do elek-
trycznego urządzenia sterowniczego na-
leży po zakończeniu instalacji zabezpie-
czyć odpowiednimi środkami (np. złącz-
kami kablowymi) w taki sposób, aby w
przypadku awarii, p rzykładowo w przy-
padku poluzowania się połączenia, nie
doszło do zagrożenia.
Przewodu czujnika nie należy układać razem z przewodem zasilania i silnika, aby
uniknąć zakłóceń.