65
4. Boîtier d'alarme
• Tirer la fiche secteur
• Ouvrir le couvercle et déconnecter les piles
• En haut à gauche se trouve le cavalier (cavalier pour plaquettes
de circuit imprimé), qui doit être retiré.
• Déconnecter la sonde de conductance, connecter la sonde op-
tique et la pile, fermer le couvercle.
• Brancher la fiche secteur. L'initialisation se fait automatiquement.
Veillez à ce que le collier de serrage de la sonde soit clipsé à la
bonne position.
Par conséquent, un déplacement de la sonde est impossible.
Mise à niveau de la sonde optique par le poste de relevage Aqualift F
Installation encastrée :
- Retirer le faux couvercle violet et brancher la sonde puis visser à la
main.
- La sonde doit être montée de façon à ce que l'œillet de la sonde
se dirige dans le sens de la pompe.
- Amener les câbles de sonde par la gaine pour câbles et raccorder
au boîtier d'alarme 20221 selon le schéma de montage.
-Le collier de serrage de la sonde n'est pas nécessaire ici.