21
1. Safety Instructions
Any personnel installing, operating, main-
taining or repairing this system must have
the appropriate qualifications. The person
responsible for the system must assure that
anyone working on the system has the pro-
per qualifications.
Proper and safe operation of the delivered
system can only be guaranteed if this in-
stallation and operational manual is com-
plied with
The system operates on electrical current.
Noncompliance with the operating instruc-
tions may result in considerable damage to
property, personal injuries or even fatal ac-
cidents.
All local and international safety and acci-
dent prevention regulation should be follo-
wed including any appropriate DIN and
VDE norms and guidelines.
This alarm unit is a part of a complete sy-
stem. Due to this please observe and com-
ply with the installation and operational ma-
nual of the complete system and any other
components of the system. Prior to any in-
stallation, maintenance, inspection or re-
pair work on any of the system’s compo-
nents all power to the system must be dis-
connected and secured against accidental
re-connection during the work.
This system is not for installation or use in
an area which is considered an explosion
risk area.
When connected the control unit is being
supplied with power and must not be ope-
ned. Only licensed certified electricians
should handle electrical work on the sy-
stem. The term certified electrician is defi-
ned in VDE 0105.
Make sure before placing the system into
operation that all electrical cables and other
electrical system are in perfect operating
condition. In the case that damaged is de-
tected on any item, the system should not
be placed into operation and the damaged
should immediately be repaired.
Any changed made to the system must first
be authorized by the manufacturer. Original
replacement parts from the manufacturer
or manufacturer certified replacement parts
assure proper and safe operation. Use of
any other replacement parts could void the
guarantee as well as any damage claims
caused by failure of the non-certified part.
The system is to be supplied with a fault
current protective device (RGD) with a con-
tinuous rated current of not more than 30
mA.
