background image

INSTALLATION AND SERVICE MANUAL

FOR

PURE LINK WATER SYSTEMS

LANCER SERIES 1300

DATE:

06/17/03

P.N.

28–0461/03

This Manual supersedes the Installation and Service Manual 28-0461/02, dated 04/23/03

6655 LANCER BLVD. • SAN ANTONIO, TEXAS 78219 USA • (210) 310-7000

"Lancer" is the registered trademark of Lancer • Copyright — 2003 by Lancer, all rights reserved.

FAX SALES 

• USA -CANADA – 210-310-7250

Warranty / Technical Support - Field 

• 800-729-1500

Customer Service 

• Domestic / International – 800-729-1500

SPECIFICATIONS

DIMENSIONS

WIDTH

18 3/4 Inches

(47.63 cm)

DEPTH

4 5/8 Inches

(11.75 cm)

HEIGHT (with Boost Pump

29

 Inches

(73.66 cm)

and Transformer)

WEIGHT

Shipping (with Boost and

33.60 pounds

(15.24 kg)

Delivery Pump, Transformer,
and two Modules)

Gross Operating (with Boost and

60.60 pounds

(24.79 kg)

Delivery Pump, Transformer,
and two Modules)

ELECTRICAL REQUIREMENTS (Only when Booster Pump is included)

100V/50-60Hz

1.2 Amps

115V/60Hz

0.8 Amps

230V/50-60Hz

0.4 Amps

WATER REQUIREMENTS

Potable Water Supply

STORAGE CAPACITY

Storage Unit

4.00 Gallons

(15.14 Liters)

One (1) Membrane Unit

4.00 Gallons

(15.14 Liters)

Two (2) Membrane Unit

4.00 Gallons

(15.14 Liters)

PRODUCTION RATE, WITH BOOST PUMP (@ 60psi, 77°F INLET)*

One (1) Membrane Unit

170.85 GPD

*

(646.7 LPD)

Two (2) Membrane Unit

269 GPD

(1018.3 LPD)

*Gallons per Day

(Continued on inside cover page)

Please refer to the Lancer web site (

www.lancercorp.com

) for

information relating to Lancer Installation and Service Manuals,
Instruction Sheets, Technical Bulletins, Service Bulletins, etc.

System Tested and Certified by

NSF International against

NSF/ANSI 58 for the reduction of

Barium, Hexavalent Chromium, 

Radium 226/228, TDS, and Cysts.

Summary of Contents for Pure Link 1300 Series





















Reviews: