KEPCO BHK-MG Series, Руководство оператора

Страница: 149 / 150

BHK-MG 1/2 (OPR) 030916
B-21/(B-22 Blank)
-223,”Data format
error”
Execution error bit 4 Multiple decimals in digit, Multiple E, etc.
-224,“Illegal parameter
value”
Execution error bit 4 For example, OUTP 2 instead of OUTP 1
-226,”Lists not Same
Length”
Execution error bit 4 Dwell list does not match voltage or current list, or no points found for
voltage or current list.
-241,”Hardware
missing”
Execution error bit 4 Requesting device 2 status (INST:NSEL 2)
-282,”Illegal program
name”
Execution error bit 4 Executing prog:run without LIST:SEQ command
-301,”Value bigger than
limit”
Device Error bit 3
(1)
Requesting a time of 656 which is bigger than limit
-311,”Memory error”
Device Error bit 3
(1)
Power-up NV RAM error
-314,”Save/recall
memory error”
Device Error bit 3
(1)
Using cell other than 1 - 41 for SAV and RCL
-341,”Non Volatile
Mem. CRC error”
Device Error bit 3
(1)
Power supply constants may be corrupted; recalibration may be neces-
sary.
-350,Queue overflow
Device Error bit 3
(1)
More than 15 errors are in queue.
-410,”Query
interrupted
Query Error bit 2 New command sent before data from previous query read. Previous
query data lost.
-430,Query Deadlocked
Query Error bit 2 Over 255 characters received in single input string.
(1) The Device error bit may be set when the status monitoring functions of the power supply detect an overvoltage/undervolt-
age condition.
TABLE B-4. ERROR MESSAGES (CONTINUED)
ERROR MESSAGE
ESR ERROR BIT SET
(SEE PAR. A.5)
EXPLANATION