Kenworth T410, Руководство водителя

Страница: 289 / 418

CAT: 8612 November 2019 Page 263
PREVENTIVE MAINTENANCE
For the material to be maintained properly, it is important that you are aware
of the correct methods for cleaning the trim so as to avoid any accidental
damage which may occur if the wrong cleaning products are used.
The procedures used for cleaning depend on the nature of the spill or
stain. Below are some common stains which are likely to be encountered
in a truck environment.
Everyday Spillage
In general, most common stains can easily be cleaned using a mixture of
mild soap and warm water. Wash the area to be cleaned with a soft cloth
or sponge, rinse thoroughly and dry. If stubborn dirt remains in the grain
of the vinyl, use a soft brush to scrub the area.
Ink
Work quickly! Permanent solvent-based markers and ball point pen ink will
affect the pigments and for the most part are difficult to remove from any
vinyl if allowed to dry. A solution of water and methylated spirits should be
applied with a soft cloth as soon as possible to remove the stain.
Paint
Cautious use of turpentine will remove fresh paint. Immediately rinse with
a soap and water solution.
Oil & Grease
Petroleum based products will stain all vinyls if allowed to stand too long.
Clean as soon as possible using a soft cloth and eucalyptus oil to wipe
clean. Rinse with a soap and water mixture.
Blood
Rub out any spots with a clean cloth soaked in cool water. If stubborn
spots remain, use household ammonia and rinse repeatedly with a clean
wet cloth. Do not use hot water or soap as this will set the stain.
Use of harsh solvents, cleaners containing abrasives, steel wool and
industrial strength cleaners are not recommended on vinyl materials.
Use of these products will adversely affect the material finish.
Only use small quantities of mild solvent-based cleaners such as turpentine
when they are required. After use of any solvent-based cleaner or other
cleaning product, it is important to immediately wash the vinyl surface with
a mild soap and water solution. Continual use of solvent-based cleaners
will shorten the life of the vinyl material.