Kenworth T410, Руководство водителя

Страница: 229 / 418

CAT: 8612 November 2019 Page 203
OPERATING INSTRUCTIONS
1
2
3
4
5
Recovery Hitch Assembly
1 Tow Pin 4 Square Hitch
Socket
2 Lock Pin
3 Tow Hitch 5 Lock Tab
Recovery Hitch Installation
Use the following procedure to install the Vehicle Recovery Hitches. See
Recovery Hitch Assembly illustration for part identification:
1. Check square sockets behind lower bumper for obstructions, clear
if necessary.
2. With lock pins removed, insert hitches through bumper and into
the square hitch socket.
3. Align the hole in the tow hitch with the square hitch socket hole.
4. Insert the lock pin into the square hitch socket hole and through
the hole in the tow hitch until the lock tab is within the square hitch
socket.
5. Rotate the lock pin 90 degrees to secure the pin in place.
6. Remove the hitches and store all parts after recovering the vehicle.